AR Annovi Reverberi RMW22G24-EZ Replacement Right-Handed Pump. 2400 PSI, 2.2 GPM, 166 Max Bar, Easy Start Valve, Thermal Relief Valve. Replacement Residential Pump. Non SX Right-Handed Pump

This was an exact replacement for my HONDA pressure washer! The hard water at my home eventually destroyed the pump...now i run a big whole house filter system to combat that problem so it doesn't destroy all of my in house water items. Replacement parts are always a bit hard to find but this was easy due to the large cross listing of part numbers and it worked excellent!

Excellent thank you!

Not as good as original

I have an Excell VR 2320 (2300 psi) which had an AR North America RMW 2G23-B pump. I called AR North America and they said that they discounted the RMW 2G23-B pump and that this pump RMW22G24 EZ pump can be used. They said basically any higher rated PSI pump can be used but that you might have to change the wand to accommodate the higher pressure if the pump you get is higher. Since my PW is rated 2300 and the RMW 22G24 is rated for 2400 psi, I got this one since it was the cheapest one for my replacement. Just make sue you get the correct mount (the hose sconnect below the spark plug . If it is 180 degree from the spark plug, you need the sx model). This pump is for hoses that connect below the spark plug. The reason I replaced the pump was because I was not getting the strong pressure like I got when I first bought the PW ten years ago and haven't used it in 7 years. . It was still spraying water but just not strong. I wasn't sure want was causing the decrease in pressure so I just changed the whole pump. It was cheap enough than buying a part and finding that's not the problem and trying something else. Now its working like new. If your original pump is an AR North America pump, call their technical service dept. They are very helpful and will provide advise. So far this pump is working great. Its easy to change. Look it up on YouTube for instructions. A small engine shop wanted $160 to replace w/labor. It cost me $75 for the pump and 1/2 hour of my time. A word of advise. Look up how to store a PW. You need to drain and fill the pump with RV antifreeze or with pump saver so that the pump, seals, o-rings, etc. don't rust, stick or corrode. I'll do that from now on to preserve the pump on my PW.

Product was just as described and fit my application. The seller kept me informed on shipping of my order. I received my item quickly and it arrived in great shape.

Cheaper than buying a new power washer!Works great

Great little pump. Put on what was a 2007 2200 psi 2.0 gpm Husky pressure washer. The hose connections were/are front mounted. I did not want the rear mounted inlet and out hose connections on the rear. The pump works great. However, I shorten the governor spring about 1/4" to give the engine a little more power. Make sure you order the correct pump as the SX model is not the same as as the NON-SX model. The difference is were the hose connections are located. A friend gave me this pressure washer and the pump was missing the unloader valve. They cost around $35 - $43. So I went and purchased an entire mew pump. I don;t know why the other pump was missing the unloader and neither does my friend so I cannot compare this pump with the old pump. I have three other gas powered pressure washers, 2,000, 2350, and a 2500psi. This pump performs just like the 2350 and 2500 pressure washers, so it's a good value at the price of $74. No problems mounting it, just make sure you have the key way for the shaft and you order the right pump SX or NON-SX. Just buy it and put it to use. I may revise this review with some photos.

The pump was well packed and arrived ahead of time.I used it to replace a bad pump on my pressure washer.Son far it's working better than new.