0.5-Meter SATA 6Gbps Cable, Straight (LD-SATA3-0.5M)

Rounded Sata cables are a must for a performance computer. They allow for much better air flow than the traditional 'band' style cable, not to mention they are MUCH easier to work with. These SATA III cables are perfect for maximizing air flow in your computer case, and since they support 6GB transfer speeds, they are also practically future proof. Their build quality is excellent. The latch works, but seems superfluous since it's hard to imagine how a SATA cable would get unplugged while inside your case--it's not like they're put under any stress unless you REALLY don't know what you're doing. I'd much rather see this feature on a USB cable!These are great little cables and exceeded my expectations. I just with they offered a 30' version for running serpantine cables around the outside panel of my Antec P82 computer case to my Blue Ray drive. Ah well, maybe sometime in the future.These are great. Pull the trigger if you need one.*****Update December 2014*****As a few commenters have indicated, it's probably unrealistic to believe that round cables will make any discernible difference in terms of airflow compared with properly routed flat cables. I still prefer round cables as they're easier to work with. However, you can accomplish the same thing with flat cables if you take your time / use cable ties / route cables effectively.That said, the cables I bought in 2009 are still in use in my current build and I've had no issues with them whatsoever. They seem very well made as 6 years of daily use can attest to.

I purchased these cables based on the reviews and the fact that I need them fast and Amazon Prime was available. Got the cable only to find out the they will not both fix in the sata III connectors on the motherboard. The connectors on my motherboard (and a lot of others) are stacked one on top of the other. Since these cables are aound the end connector on the cable has a big bludge where the wire comes into the connector. If you look closely on the picture you can see what I am talking about. This prevents two of these cables from being placed in the motherboard connectors at the same time. I could barely get one of these round cables and a flat cable in at the same time. It put, what I think is, too much pressure on the motherboard connector. If your motherboard has connectors that are not stacked then these cables may be fine. The cables do seem to be well made. One other thing. You do not need to buy sata III cables. Any good quality sata cable will work fine. I went to my local computer parts store and got two 19" sata cables for around $6.00 for both. Search the web for something like "do i need sata III cables" and you will see what I am talking about.

While the price + shipping makes this an expensive cable, the true testcame in installing and using it:* Positive connector does not slip off and simply stays put.Disconnecting is easy and lacking in surprises.* Cable is flexible enough to fit in a tight case and round profileblocks air less than a flat one.* Length is exactly enough for connecting a drive to PCIe card acrossthe motherboard in a medium desktop case.* In operation (at 6GHz), no drop-outs, or any other mishaps.Overall, this is a very boring and invisible product.It does exactly what it says it would do, and is totally lackingin surprises and excitement. This is what you want from a cable.Right?P.S.If it ever fails, I will update this review so you can tell how long ithas lasted. My guess? Years from now.

High quality round cables.you want round cables in a gaming machine for improved airflow and these cables delivered. they were long enough for my antec df-85 full tower case and worked awesome.my only concern is the fact that the connectors are thick. they almost didn't fit next to each other because of that fact, so I am giving them 4 stars.if your mother board has the sata connections stacked on top of each other. you might want to maybe look for a thinner cable.

I build custom liquid cooled systems... and have built quite a few of them. They need quality, reliable parts. The drives need to work, period.On a recent build I used these cables (I bought two on Amazon, had four from elsewhere)... two out of six were bad immediately. Drives would not post. I replaced the bad cables, and the drives posted with no problems.The following day... another cable just went bad... and I had to replace it. So I removed all of these cables... and threw them in the trash, where they belong!And as someone else mentioned, they are poorly designed and don't fit together well in the motherboard SATA port.My advice... don't buy these.. they will just cause you headaches!

When building my rig, I found that the motherboard only provided two SATA cables and I needed another 2 ASAP and found these here with Prime shipping. When installing them they are a bit tight and I thought maybe my side panel on my case would not close all the way due to my setup but it works fine. I have no problem how the SATA cables are stacked on my motherboard.To be honest I think if I had gotten a cable that had one end that was at a 90 degree angle it would've been perfect but so far this hasn't caused me any trouble and both the SDD and HDD that I am using these for haven't failed me yet.

description says it all, reallymy corsair force gt ssd did not come with a sata 3 cable (kind of a bummer honestly, cuz my mobo, the evga p55 ftw 200, only had sata 2 cables)on a side note, however - these cables do NOT make any real difference from a newer style sata 2 cable as far as speeds are concerned. I have benchmarked both. THat being said, why not just get this cable for sata 3 applications anyway? theyre good quality, same price (here) and have a great clip design, and it is POSSIBLE they make a SLIGHT difference in speed.