LutronCaseta Smart Lighting Wall Plate Bracket for Pico Smart Remote(Pico Sold Separately), Directly Mount Pico Remote To The Wall, 3-Way (No Wires Required), PICO-WBX-ADAPT

Lutron Caseta Smart Home Dimmer Switches - Happy!I had recently been experiencing flickering with my lights on a random and more regular basis. My research indicated to me that it can be the switches causing this. As a result, I thought I'd look for new switches to see if that would resolve my flickering issues.My research led me to the Lutron Caseta Smart Home Dimmer Switches. So I purchased what was needed for my open area in my house which includes our kitchen, dining space, and family room.In our kitchen, we have 3 light groups. Our main group has 7 ceiling lights with 2 switches. We then have 2 pendant lights over our island with 1 switch. Our 3rd group, we have 1 pendant light over our sink with 1 switch.In our dining area, we have 6 ceiling lights with 3 switches.In our family room area, we have 4 ceiling fan lights with 1 switch.Based on my research, I determined what I needed to purchase to replace my switches noted above. I purchased 5 new switches, 3 remotes with 3 wall plate brackets, plus the smart bridge.The single switches were very simple to install.I then had a case where I had a 3-way switch scenario and a 4-way switch scenario. I worked on the 3-way switch one first - I was bad and failed to mark the wire that was connected to the different color screw when disconnecting the old switch - my failure to follow the directions Lutron provides. :( This resulted in not connecting the wires properly on switch the first time. The lights would come on but I could not turn them off or dim them. After turning the breaker switch back off, I did some research to figure out my problem. This is when I discovered my mistake noted above. I then figured out which wire I should have marked. I then reconnected the wires accordingly to the switch. I then tried it again. This time I had success which allowed me to turn the lights off, dim the lights, and of course turn the lights back on.In my next case with the 4-way switch, I took what I had learned from the 3-way switch mistake I made and applied it for this situation as provided in the instructions by Lutron for a 4-way switch case. This time I took the proper step to mark the necessary wires as noted in the instructions. In following the directions better this time, I had success on my first attempt. :)The remotes replaced switches in a number of cases. I was able to pair those easily with its intended light group/switch.I added the smart bridge to my network, installed the Lutron app, and was able to pair everything in the app to all of my lights that I installed the new switches for. So in addition to using the switches, I am now able to use the app to turn the lights on/off, dim the lights, and creates scenes.Finally, I added the skill needed for Alexa to work with my new light setup. Now, I can just tell Alexa to turn a specific light on/off, dim the light, plus I can have Alexa apply a scene that I have setup. It is very slick.I am very impressed with these light switches. They are very simple to install. It is simple to pair the light switch remotes. It is simple to set up and configure the smart bridge. It is simple to configure to work with Alexa. I give Lutron an A+ for the ease of installing these lights.In doing all of this, my 10-year-old son helped me with all of this, and by the end, he was doing a lot of this by himself with little guidance from me. It was a great learning experience for my son and I. I explained the dangers of electricity and making sure we proceed very cautiously, plus this should never be something he attempts to do on his own. Safety is of the utmost importance in dealing with electricity. I have changed light switches in the past and worked/helped on some remodels, but I am in no way an electrician ... novice with some exposure.In the end, it appears my light flickering has disappeared, at least up to this point. It is early yet - just a few days, but it is very promising. This was the goal of the upgrade to fix the light flickering. I love it so far. Thanks to Lutron for making this all so simple.Additionally, I would like to note that if you are not comfortable with this DIY install, please get help from an electrician. Better safe than sorry.

Super easy to install, holds the remote snug, and makes it feel like a real switch. Great for 3-way setups with no wiring.

I recently purchased the Lutron Caseta Smart Lighting Wall Plate Bracket to mount my Pico Smart Remote, and it’s exactly what I needed! The bracket is a simple but essential accessory that makes using the Pico remote much more convenient, and it blends seamlessly into my existing setup.Installation was incredibly easy. The bracket fit perfectly into a standard wall plate, and I didn’t need any special tools or skills to set it up. It took just a few minutes to mount the Pico remote securely, and once in place, it looked just like a traditional switch. I love that this bracket allows the remote to sit flush with the wall, giving it a sleek, built-in appearance. It really helps keep things looking neat and organized, especially if you’re like me and prefer a clutter-free space.One of the standout features of this bracket is how sturdy and secure it is. The remote clicks into place firmly, so there’s no worry about it wobbling or falling out, even with frequent use. It stays put while still being easy to remove when needed. The build quality is excellent, just like you’d expect from Lutron products.This bracket has made using my Pico remote so much more convenient. I now have it mounted in a central location where I can easily control my lights without having to search for the remote. It’s great for keeping everything in one place and makes it feel like a permanent part of the room’s lighting system.Overall, if you have a Pico remote, I highly recommend getting this wall plate bracket. It’s a small, affordable accessory that makes a big difference in functionality and aesthetics. Simple, effective, and well worth it!

Holds pico secure

Perfect solution to create a 4-way light circuit where there was originally only one switch. I will never stub my toe again walking through that dark room.

I love this bracket because I needed to create a way to turn off the LR lights when I reach the stairs to the upstairs bedrooms. So I got another remote for the Lutron dimmer and this bracket. the only problem I ran into was that after mounting the bracket, I tried to install the Lutron plate, and the screws were so long they needed to extend way into the drywall, so I had to remove the bracket and drill some holes in the drywall for the screws to extend into, then reinstall the bracket and install the plate. In the end, it worked fine, but the instructions should indicate that those holes in the drywall need to be opened up to mount the Lutron plate.

Great for adding a remote switch wherever you want and with the flexibility of controlling any other item. Then look on the wall is exactly as a standardSwitch.