Lifts DR-2-2" Front Leveling Lift Kit Compatible with Dodge Ram 1500 Pickup 4WD

Turned out great! Only took about 2 hours to install and you dont need to replace the control arms to get the correct camber.

I installed this on my 2019 Ram 1500 with factory air ride suspension and install went pretty smooth.I first set the suspension to lowest “entry/exit” mode, removed the positive connector from battery before jacking it up and disconnecting the air line connector at the top of the air strut. I had to loosen the lower a-arm bolts and disconnect the sway link and tie rod steering link to drop low enough to get the strut in with the spacer. For air ride equipped Ram’s, this spacer alone will not level the air ride at “normal” ride hight. I also bought adjustable links for the front air ride sensors from AirLinks Suspension’s website. Both of these products work together to raise/level the ride hight AND still keep the same ride comfort. I watched BDS Suspension’s YouTube tutorial for their 4” air ride lift as a reference to a couple steps. I will be installing 33x12.5r22 with 10” wide wheels. Eventually I might go to 35s. Don’t forget to get an alignment afterwards.

Product is good. Put these on my 2020 ram 1500 and was easy to install. Took about 2 hours for both sides without a lift. This is the second time using this company for lift and I will continue to get in the future.

Seems well machined and could staned test of time..does what it it's ment to do! Seems to have same ride quality. Must have alignment after install..

I highly recommend them , installed within 2 hours , leveled the truck , I would not go over 2 inches , 2 inches is great !!! You don’t need an alignment, I drove my truck , still the same steering was still centered, drive it first after install before aligning drives the same and great , definitely can tell the different height once sitting inside

First, solid product. They seem like they’ll hold up for quite some time and appear well constructed. The print isn’t on it with the company name, which is ok, you won’t see it anyways.I would recommend the company stamp their name though so if anyone ever takes the suspension apart and sees them, they know what to replace them with if they need replaced.On to the bad. The instructions aren’t clear, but they’re pretty straight forward for an install. I did use threadlocker on the Allen’s though, blue 242. Since you tighten them to your strut mounts, you spin the nut the same direction to unscrew the Allen bolt. So a bit of loctite just for peace of mind.I would recommend these to anyone with a 2023 RAM 1500 4x4 that wants to eliminate the factory rake with minimal effort and with something that is easily undone.

Install went in easily .Took about 2 hrs total .Truck looks great .No more rake.More aggressive.Will be able to fit larger tires on it no problem.Jus make sure you get an alignment after doing it .

23 Ram 1500 quad cab