Toifucos High Accurate Car Tire Pressure Gauge 360°Adjustable for Auto and Motorcycle Heavy Duty Tyre Pressure Gauge

Over the years I have had a number of tyre pressure gauges. All of these have failed in the end, except the the ones with the sliding rod that comes out, and they are hard to read.This gauge is well made. It has a protective rubber surround, and a swivelling head that makes it really easy to use. The non-return valve seems to be excellent and leak free. The scales are clear and the reding is accurate.Ther are lots of gauges that look like this, but this one actually works.

Easy to use and suitable for the higher tyre pressure on my motorhome

Bought this gauge to replace a different make of dial gauge I had which stopped working. This gauge works well the readings seem accurate, the gauge itself is slightly smaller in diameter than previous gauge and graduated in units of 2 psi compared to 1 psi, but on using the gauge it is clear to read and gives the degree of accuracy I was looking for. Very pleased with it. There are similar gauges advertised which are more expensive but I doubt they give any improvement over this one.

Bought to replace a battery operated device. Easy to use seems accurate. Connector swivels to allow easy access to the tyre valve. Keeps pressure reading until the release button is pressed. Well made item, rubber covered to help prevent damage from knocks & drops.

Thia is a neat and compact tyre gauge. It’s handy to keeo in the car. It’s easy to use. I checked with readings from a pump and they matched, soI think that it is accurate.

Seems about 1lb per square inch out, according to my brand new inflator. Should be near enough for that. Even the garage inflators can be inaccurate.Who knows?Near enough for me.Unit seems reasonably strong, I like the rubber protector that surrounds it.I had to hand tighten all the screwy bits, because they were all loose.I am not on an endless trudge through life to find the most perfect and most accurate tyre inflation gauge, so it'll do!!

Easy to use, shows both psi and bar on an easy to read gauge and looks rugged but, it seems like many such pressure gauges, I am not sure of the accuracy. I have one of the old type gauges measuring by how far a rod is moved along a scale and over years i have found that is generally pretty good. I also have a pressure gauge built in to my tyre inflator and, finally, my car has a built in tyre pressure readout on the dash. Within 0.1 bar the last three more or less agree with each other but this gauge reads 0.2 to 0.3 bar lower. Which is the more accurate I have no idea but averages seem to suggest this gauge is reading low. This gauge seems OK generally and I will keep it around but will keep in mind that I suspect it is not so accurate.

Works as I expected