Armor Fine Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings - for Up to 5 Gallons

I seal our stamped concrete patio every year. When it was wet, it was darn-near like walking on ice. I gave this a try. Is it really expensive sand? Yes, but it is VERY fine. Does it work well? Definitely! It didn't affect the look of the patio at all, but now it's like the bottom of your shoe is glued to the patio when it's wet.The directions say to mix the whole bottle into a 5 gallon bucket of sealer. I use the Foundation Shield AR350, but I didn't want to pop open the whole bucket top to add the additive to the sealer....I roll the sealer on with an 18" roller, so I poured some sealer into the roller tray, poured a bit of the additive in to the tray and mixed it up with a paint stirring stick. It worked great! Highly recommended!

Adds a noticeable grip to the cement. Not painful to stand on. Applied on top of wet second coat and rolled back over it. Simple to add to cement sealer for some added grip. Use was for a pool deck.

Perfect for pool deck. Mixed it heavy with top coat on concrete stain. It's like a powdered sand but not like walking on sand paper. Easy to roll on and has added safety to the pool surrounding.

The additive when put down did help prevent slipping. The problem we have is that the sealant still has spots where it is slick as ice. The additive also was kind of sharp and a couple guests in our pool cut their fingers on it…

It’s a great idea on slanted driveways or walks but I recommend rolling it on with a thick nap. We used a sprayer and it kept clogging it up.

This product was not compatible with the sealer I used so I returned it.

I purchased this non slip additive to add to Foundation Armor’s AR350 which I used to seal my entire driveway, porch and sidewalk. My poured concrete is all 8 years old, broom finished and previously unsealed. In the photo you can see my untreated driveway and my porch 48 hours after the second coat of AR350 with non slip additive. I love how the AR350 darkened the “wet look” of the concrete but I digress, this review is about the nonslip additive! I used the method of adding the nonslip to the sealer (for the second coat only) and mixing with an attachment on my drill motor. I used the nonslip on my porch, sidesteps and sidewalks. Ultimately I did not use the nonslip on my driveway as the AR350’s finish was far less slippery than I feared it would be. I think the non slip additive is perfect for trip-prone areas like steps or sidewalks and works great.

I mixed this in with the 5 gallon bucket of concrete sealer. I used about 2/3 the bottle as I didn't want it to feel too sandpaper like. I shook it up regularly when applying and am very happy with the little bit of grip provided