LK 6 Pack for Apple Watch Ultra 2 Screen Protector 49mm / Apple Watch Ultra [Install Tool Included] Touch Sensitive, HD Clarity [9H Tempered Glass] Screen Protector iWatch Ultra 2, Shatterproof

There is so much misinformation in the reviews about this product.Watching the how to video IS confusing though.My protectors came with a QR code, but I pulled up a YouTube video instead.The sticky adhesion part was backwards on mine as some people have mentioned which made the video confusing because I couldn’t pull the tabs off the way they wanted so I had to improvise.It seems some screen protectors,come with a sticky circle that has adhesion and some come with a silicone square like mine. The square still sticks but can be used indefinitely as it does not have “adhesion” per se.Aside from my adhesion being backwards, I got the screen protector on the watch and used the squeegee, etc., etc. but mine still had bubbles. I wore the watch all day with the bubbles.The following day upon waking all the bubbles had dissipated!I have worn this screen protector for 4 days and no problems.I have not had any lifting at the corners and bubbles have not returned.The screen protector is so clear I can’t even tell I have anything on the watch.The video is a little complicated in my opinion so I will simplify.1.) Clean watch face with alcohol pads. Clean it good! Also make sure you have washed your hands thoroughly, so there is no oil on them or you can use disposable gloves. Powder free of course.2.) Put watch on silicone base so it won’t slide around.3.) Use the dust sticker to remove any excess debris.4) In my opinion all of these tabs are useless. Pull all off and put the screen protector sticky side on watch face. If you misplaced it, you can re-lift several times and get it as centered as possible.5.) Lay cheese cloth over watch for protection and use squeegee over cloth to get out as many bubbles as possible. Go in one direction when using squeegee as not to tear the screen protector, but using the cheese cloth will help prevent this.6.) If you did all of this correctly and you still have bubbles just wait till the next day and they will be gone.Done!

On Amazon I looked at all of the watch face protectors for the Apple Series 7, and all of the reviews. I will break this product down cut and dry and honest. First, they were one of the least expensive. With that and the fact that they come in a pack of 6 I wasn’t expecting good results and got the 6 pack because if there were bubbles, they didn’t go on straight or adhere, I could start over. I have had bad luck with tempered glass phone screen protectors and expected the watch to be the same way. If you scan the QR code there is an instructional video. Use it because there is a simple but step by step process to this. The kit has everything you need even a non slip rubber base to hold the watch in place on the table. It is not tempered glass but a film. I applied it on my first try and it was 100% perfect. I took my time and made sure it was on the watch face straight and made adjustments to get it perfect. I then followed the steps to remove the backing and apply it. When I was finished there were NO bubbles, the edges all around had adhered with no peeled edges or air pockets and I could not tell it was on my watch. I read reviews where people stated that it didn’t cover the entire face and left a small gap between the watch face and metal frame. This is true but the gap is small, and I can not see a line with my eye even in a well lit room. I can slightly feel it with my finger nail. The Series 7 watch face is not flat, as you know. This screen protector adheres to where the face starts to round off and does cover the rounded corners without a crease. It fits perfectly. I wear my watch 24/7 except for an hour to charge. I also bump into things and the reason I bought this protector was because I had a few tiny scratches and one that I could feel with my finger nail. This protector is “self healing” so it will cover and hide tiny scratches. I can not see mine. The small scratch that I could feel with my finger nail is still visible if I look for it. I really had to look for it to begin with and it was probably there for a while before I noticed it and bought these protectors. I have had this protector on my watch face for a few weeks and it is still flawless. I don’t wear my watch in the shower because it has a Velcro band, so it hasn’t been under water. There are no scratches on the film screen protector and I still can’t tell it is on the watch. Here’s what seals the deal…when I put the protector on my watch I also did my wife’s Series 7. It is perfect and went on flawlessly the first try. She is a nurse and wanted one because she bumped into the metal rail on a stretcher and was sure that her face was scratched, but it wasn’t. Apple says that the Series 7 has a harder scratch resistant face than the Series 6 and leads you to believe that it will never scratch and they even have a fancy name for the face material that I forgot. This is false. It will scratch because mine did but just a little. I will end this by saying that our watches were $449 each, financed through the Apple Store for 24 months. I got mine in December and in 4 months had a few small micro scratches and the one that I noticed. It has to last 24 months at least. Apple Warranty does not cover cosmetic damage and when I called Apple they gave me a quote of $300 to put a new face on it, because I said they it was advertised as scratch resistant. In the end I was able to preserve the condition of 2 watches for about $6. If I do scratch the film working on my boat engine or installing cabinets etc. which are examples of what I did wearing the watch before I still have 4 more screen protectors in my closet! These watches are a big investment and I should have purchased these screen protectors when I got the watches. My advice is to ignore any review less than 5 stars because I am very picky and critical and not the best at applying screen protectors. Some people say that they are not great if you use a case for your watch, but I think those are tacky anyhow and like the smooth, sleek, contour look of my green Series 7 with green and black band. I suppose they like a case to protect the colored metal part of the watch which I can’t see ever bumping or damaging. I highly recommend this product, they go on great, and are invisible…plus you have back ups on hand if you ever scratch one. I would buy this product again and it works perfectly for my wife and I. Thanks for reading all of that I wanted to be thorough and share my views on the watch, it’s cost and replacement face from Apple, and this product for it.

I bought two different products; one for ultra watch 2 and the other one for iWatch 10, from the same company and seller. The one I bought for Ultra Watch 2 was very good; it was easy to apply.But the model I bought for iWatch 10 is not that good. First of all, the video that opens when you scan the QR code on the back of the package has nothing to do with the product. It is very difficult to apply the product to the watch. There is a fold in the middle; when you remove the product from there, there is an air bubble and it does not go away. As I said, the one for Ultrawatch is perfect but the other is ok. The seller was just so kind and refunded the one with problem.Btw, it is a very thin plastic layer, not a durable material