VEVOR Gutter Guard, 5 inch Width, Aluminum Leaf Filter DIY Gutter Cover, 26 PCS 104 ft Total Length, 0.157'' Hole Diameter & 0.02'' Thick Fits Any Roof or Gutter Type

My primary concern was the gutter guards not being able to handle the volume of water from a really heavy rain and spilling over the gutters of our ranch style home with a 12/4 pitch roof, Within an hour of installing the last section, it poured. Maybe an 1½" an hour. No issues at all. Now granted, the guards were sparkling clean. So if I keep 'em brushed off, I have no doubt they can handle any down pour.BTW - I wasn't able to find a gutter guard brush I felt made sense, so I made my own from a length of 1½ x 1½ pine with a bench brush attached at an 11° angle to one end. Works great.

These worked great. Installation was easy as they fit perfectly in the 5" gutter. My house has a lot of 90 degree turns so the mitering takes extra time. The straight sections are a breeze. It takes longer to go down the ladder, move it over a few feet then back up than it takes to put in one straight section. I installed 260 ft. Took about 6/7 hours but again I have 21 miter cuts. One tip is to get an extension for the bit. If you use the supplied bit directly in the drill the chuck will rub against the first single when driving in the screws against the facia board. Everything was like the description, came with screws and 8mm driver.

These things are awesome and very easy to install, the screws provided work great, I highly recommend them. leaf filter wanted almost 3k to install their version, I,m 77 and active so if I can do it so can you, just be very careful and use a good solid ladder or a roof tie off.

Really nice product excellent price plenty of self tapping screws that’s nice and beefy I would gave it 5 stars but it was missing the bit to screw it in I don’t mind I have few that size but overall worth the price

I had no problems fitting these on my gutters. They look great when you are on the roof and you cant see them on front regular view. They are very easy to cut and install. They are lightweight and easy to move around. They seem to be of quality build. I definitely recommend these. I bought the 200 plus square feet and the 50 square all for under $200.

Perfect fit for 6” gutters. Easy to cut as needed. Plenty of included screws as well as the nut driver. If gutters are instalked straight these guards snap into place.

This gutter guards are great! Easy to install it took me about 3hours to install. Easy to cut with tin snipes.They fit perfectly. The plus it saved me $2900 dollars. Great DIY project. No more climbing on a ladder to clean leaves out of my gutters.

I think the thing I've learned while reading reviews of different kinds of gutter guards from real people is that the angle of the roof has to be considered. The steeper the roof, the better the gutter guard has to be at catching water. I think that for some roofs, gutter guards just aren't a good option at all.On my last home, I installed some gutter guards from Costco that were a stainless mesh with aluminum extrusions on each side. You would think these would be great at catching water and for the most part they were, but even still there were areas that were a problem. That roof was something like a 5/12 or 6/12 pitch.I installed these on my new home which is a very low pitch. Something in the 1/12 range, maybe 2/12 at the most. They have a fair amount of flat surface and I would have to believe that on a high pitch roof (cape cod style), these would be horrible. The water would probably just skip across them and over the edge when you got a heavy rain. However, the fact that these sit down inside the gutter, would indicate to me that they could work on up to a 6/12 roof. If you live somewhere that you get torrential downpours frequently, then you probably don't need gutter guards because those rains are cleaning your gutters. Maybe? Or maybe, you just need to clean your gutters instead of installing guards because any covering on the gutters will cause the rain to run over them.Anyway, these are made of reasonably strong material, though it is easily bendable by hand. Once installed, it is unlikely to see much load. It will keep leaves and acorns out of my gutters (already has). They are much cheaper than having someone install them professionally, like 10% of the cost. If you can stand to be on a ladder (or on the roof) for 1-2 hours installing these, they will go a long way to ensuring you are back on that ladder or roof anytime soon again.