Key Fob Keyless Entry Remote fits Toyota Avalon, Solara 2005 2006 2007 2008 (GQ43VT20T 4-Btn)

The REMOTE ARRIVED A DAY EARLY.....Happy! It is a very easy process to set up. Works perfectly . Great price

Great price. Was able to program it to my car in under 5 minutes.

Works perfect.UTube tells you how ro program to your car.Love it

Absolute garbage. I am able to establish a Bluetooth connection to the device but the app will not communicate with it. It will not allow the keys to be programmed. Don't expect manufacturer support either

Perfectly fits Toyota Avalon 2005!

Worked great on my 2007 Solara . Programmed using you tube video…easy peezy keezy. But , both fobs needed fresh energizer CR2032 batteries. Lose a star for battery .

Product took two minutes to program. I had my doubts, but it was truly as easy as following these instructions that I got from another purchaser.1. Start withThe key out of the ignition,Drivers door is open,All other doors and trunk should be closed and driver’s door is unlocked.All other doors are locked2. Perform these steps within 5 seconds.A. Insert the key into the ignition (Do NOT Turn it) and Pull key out.B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.3. Perform these steps within 40 seconds.A. Close then open the driver’s door.B. Close then open the driver’s door.C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.4. Perform these steps within 40 seconds.A. Close then open the driver’s door.B. Close then open the driver’s door.C. Insert the key into ignition and leave it in the ignition.D. Close the driver’s door.E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds,The power door locks should lock then unlock automatically indicating successful entry into programming mode.Return to step 1 if the door locks do not cycle at this point.At this point the programming mode has been entered. I think that it stays in programming until the door is opened.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds.Within 3 seconds, the door locks should lock and then unlock once indicating successful programming.If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open driver’s door.8. Test the newly programmed remotesIf the regular process does not work, TRY PROCESS WITH ALL CAR DOORS UNLOCKED

👍🏾All I have to add... PERFECT AND SUPER EASY TO PROGRAM 👍🏾