VEVORShower Curb Kit 38" x 60" Watertight Shower Curb Overlay with 4" PVC Offset Bonding Flange, 4" Stainless Steel Grate, 2 Cuttable Shower Curb and Trowel, Shower Pan Slope Sticks Fit for Bathroom

Using this kit now but going to not use the curb. Sinking the shower in the floor so it will be flush with the bathroom floor with an extra floor drain under the shower door. I'm also going to extend it to have a seated area.

I have installed all different types of these types of shower pans, but this one actually takes the cake for the price. I used it for a 60"x34 shower with a custom bench seat in the back. Its easy to cut and work with for sure. I used the Schluter adhesive with it and I saw and felt no problems with it. The ONLY complaint I have is the lining on the shower pan is very loose. It makes it kind of a pain to spread the mud when tiling and it dries out super super quick. That being said a pro tip I figured out as I went. Get a wet sponge and wipe down the shower pan, then get a shopvac (I used a small one) and use a wide nozzle on the tip and wipe it down. I`m not sure why but it sucked up to the base and created a very nice flat surface.Ill be using these for all my future shower installs. Cheap, easy and the drain system I think goes together fantastic.

I had been planning on buying a comparable item at my local lumber supply store but kept holding off due to the high price. Was very happy when I found the very similar product from Vevor. I must say I was very happy when it arrived and I removed all the parts from the well packaged box. It was as good as the much higher priced alternative and after installation I am very impressed that I could get this quality for this price. I saved approximately $400 dollars on the shower. Thanks Vevor, I would defiantly recommend this product to anyone looking at the same product at the big box store.

I found the product very easy to use and ample material to make a tub into a shower. The only issue was the construction of the curb, as after I installed and tiled the border into the shower it couldn’t carry the weight of a glass door and cracked when stepped on. I solved problem by removing tiles and cutting the top off, filling it with concrete and replacing the tile. Now it holds both my weight and the glass doors.

Did the job but found product to be inferior to competitors. I found the wall material difficult to put up. The shower pan and curb were fine and easy to install. In the end i decided to red guard the walls anyway. I don't think i would use the fabric again it not worth the risk and to difficult to install. I might use the pan and curb. you get what you pay for.

I’ve been looking for something like this! It’s perfect! 😍

Vevor product is a very deceptive item. It looks like Wedi products, it looks like Schluter products... But the comparison is not even REMOTELY close to their quality. Shame on me for even trying to save a buck. This product is garbage. Not only that, BUT this is the important part... IT IS NOT RESIDENTIAL BUILDING CODE COMPLIANT!! So if you install yourself, and are having a bathroom inspected by your city, and the inspector does his job correctly, you WILL NOT pass inspection with this product! With that said, spend the extra money and buy the reputable, ICC stamped products. Don't cut corners. Learn from my mistake. Do NOT compromise your home with expensive water damage from this product!! Use WEDI, OR SCHLUETER BRAND! They are the two best options going this route! DO NOT USE THIS PRODUCT!! On another note, their customer service is nonexistant as well... They have a 3rd party answering service that knows nothing of the product, and let's you know that the company will only contact via email. HUGE runaround game!I had to tear it all out and install WEDI, or SCHLUETER brand shower kits for it to be finished and compliant. Building codes are there for a reason, and ultimately protect your investments!! Follow them and build things with the correct product, regardless of saving money... It will cost you WAY more to fix anything resulting using these products!!Hope this helps!!DO NOT USE IN YOUR HOME!! MAKE SURE A CONTRACTOR DOES NOT USE THESE IN YOUR HOME EITHER!!!! YOU WILL BE SORRY!!

After using Schluter products for sometime, I was a little reluctant in trying something at a lower cost. I was very impressed with the product and the ease of installation. the adherence of the mortar to the fabric was exceptional and the drain products all worked as designed. I’ve included a photo of the finished product.