Liquid Filling Machine 2-118 Oz Bottle Filler Machine with Anti-Dripping Nozzle Diaphragm Pump Digital Control for Cosmetic Water, Wine, Makeup Remover GFK-160A

maravillos, buena calidad, buenos materiales, llego a tiempo, lo puedes usar o regalar. sin duda volvere a comprar de este vendedor viendolo por calidad precio es buena desicion adquirir este producto

The media could not be loaded. I love this thing! However, the instructions manual was little to no help. So, let me break it down for you and get you bottling!First, push and hold parameter set. The number next to the (P) is your flow rater. The number next to (W.T) is how many seconds the pump operates. And the (S.T) is the seconds you have once the pump stops to when it begins again under continuous/inching.I personally found it easier to just hit the off button and turn it back on when you're ready. I posted a video where it freezes on what I found to be the optimal flow rate and the amount of time to fill a 750ml wine bottle. Now, depending on the ingredients in your wine, some batches of wine may be slightly denser than others; if this is the case, you may have to increase or decrease your (W.T) time. The good news is though that with 7 pre sets you won't lose your original setting switching from batch to batch. Just hit the red button. Yes, the red button, and program the new batches’ parameters under a different setting.

I used this twice to fill hot sauce, but unfortunately it could not handle the viscosity of the sauce. I am new to liquid filling and did not know prior to purchase. But, i did order a stronger liquid filling machine and that handles the sauces much better. This machine is better tailored for more water-like liquids. Hope this helps anyone who may needing a liquid filling machine for anything thicker than water-like levels thickness.

The media could not be loaded. So I bought 2 of these in case 1 didn't work. Maybe I should have bought 3 because BOTH didn't work. They turn on, but they don't pump anything at all. I took 1 apart to see if there was something pinching the tubing, but its just a bad pump. Poorly made in China and clearly is was designed by a company that doesn't care at all about making a quality product. Attached is a video of the machine taken apart and not working.

It's accurate. The unit is housed in stainless steel. There's some protective sheeting on it that needs to be removed prior to usage. Most machines have this sheet to protect the machine from scratches during transport.I honestly didn't try the motor that came with it and attached a different 12V DC motor to it. I bought this thing specifically for the panel.Basically, the control panel will turn on the motor for a specific amount of time and pump your liquid. I would imagine you need to prime the pump every single usage. I switched it out with a submersible pump so I don't need to prime it.I wouldn't use any viscous liquid. You pretty much want to be pumping water.Pros - very accurate, good product, easy to useCons - the motor head would be better if it's placed outside of the unit for easier access and would be better if it's cleanable. Centrifugal pump would be better. Sometimes the panel bugs out and needs to be opened up to breathe a bit. Also it would be better if it's sealed properly with rubber gaskets because most of the components are loose. If you're using it in a watery environment it would be wise to seal it before using it. Lots of small gaps can let in water.

I bought this because I was tired of the hassle with the standard wine siphon filling process. This works great! Set it up (I used speed 8 for 14.8 seconds) and the bottle is perfectly filled each time with just a touch of a button. I did find that to eliminate any froth I had to tilt the bottle slightly, but once I did that I had no issues at all. Easy clean up as well. An added bonus, because of the larger intake I was able to gain an additional 600mls from my carboy with no sediment at all. If you are a home wine maker and are looking for a better bottling process without dropping huge dollars, this is for you!

First, everything was in the box but, the power jack is loose. Second, the instructions were to remove the fill nozzle from the tube before inserting the tube in the holder. This proved to be impossible without damaging the tubing or the nozzle. I inserted the nozzle into the holder and tightened the thumbscrew. This worked fine. Third, the fill is only repeatable if the suction head is constant. In fact, the best approach is to ensure negative suction head because positive head will cause siphoning and overfill occurs. If you want 750 ml everytime, you must adjust the height of your reservoir to ensure constant negative head within a narrow range. Overall, it was what I expected and can perform adequately with appropriate care.Update: since writing this review, I have solved most of the issues. I am getting 750 ml +0 -8 consistently when filling wine bottles. It takes a lot of testing to find the correct settings but once found, the machine is repeatable within about 1%.

Perfect