RUXIFEYSequential Switchback Side Mirror Reflector LED Turn Signal Light Smoked lens Compatible with 2009 to 2014 Ford F150

I really like the black look that matches the mirror housing. The sequential flash really helps let others know that your are changing lanes.

Changes the whole look of of the truck. Easy to fit but take care prying off the mirror as I believe they are costly to replace. I had these fitted to both sides in under 20 minutes. They look great and I am very happy.

Installed quickly and was really easy to wire, worked great and has been working for 2 months so far.

Did not come sealed I tried to glue lasted 3 weeks first rain stopped working would not buy

I paired these indicators with the rear facing sequential indicators on a 2011 F150. Installation was fairly straight forward and connections are as the instructions and other reviews indicated. However, if you plan to run the wire(s) for running lights, I recommend just remove the door panel and the three nuts holding the mirror on and remove the mirror from the truck. It takes probably 3 minutes with a 6, 8 and 11mm socket, a t20 bit, and hook to pop cover panels on the door panel. This also affords you the opportunity to most delicately remove the mirror from the internal mount (it just snaps on in 4 paired clips at 2,4,8,10 o’clock positions behind the mirror). If you are like me, I cleaned inside the mirror body, behind the mirror on the door and most importantly I was able to easily drop the running light wire(s) into the wire channel and pull through. It helped to firmly pull the end of the running wire through my fingers to straighten with a slight curve and feed through the wire channel and then tilt the mirror on its mounting end and the wire just dropped out or was within grasp to help pull it through. Once ran, fold excess running light wire back up, reuse the wire tie and when remounting mirror feed through door channel with the mirror electrical connector. Once remounted you can feed the wires inside the kick panel through the door rubber electrical grommet. You don’t ‘have’ to remove the mirror to mount these but I found it less time consuming and frustrating because the wire would bunch up and my fish tape was too big/stiff to make the 90 deg bend in the mirror body when it was mounted. All in all 10min per mirror start to finish with cleaning and even using McGuire’s black plastic restore on the mirror plastics.