OVERTURE Rock PLA Filament 1.75mm, Marble PLA 3D Printer Filament 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most FDM Printer (Rock White)

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping.Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts.Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed.For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers.I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong.If I run into any issues I'll update accordingly.Update 7 Days LaterSo i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm.Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

The size is a standard roll. It works great in Bambu P1S AMS. I have not noticed any cardboard disintegrate when using it. I gotta say that the color is a nice matte. Great quality as well. Since it is PLA, there is minimal smell. It printed with good consistency throughout the projects that I made. It is also very well priced compared to other brands.

Bought for my husband’s printer so he could make me vases for Mother’s Day gifts. They turned out perfectly!!! No issues with the print at all. The beige and wood are my favorite. I love the smell of the wood while it’s printing, smells like burnt wood. We only buy Overture and Bambu Lab filaments.

It can be a little finicky to print but thankfully it comes with a chart that you can follow for temperature instructions. The colors may not marble evenly, sometimes you get a solid block of one color and then quick striation of other colors but such is the randomness of marbled filiment.

Wow, I’ve tried multiple different brands before landing on overture because I liked the matte black color PLA they’ve got. This rock PLA has outstanding results I personally think because it has a level of flexibility, it’s still super sturdy like all PLA but when snapping supports off things like limbs and weapons the material will bend before snapping. Not only that but the material color and complexion itself adds depth and detail I don’t find with other color PLAs. No odor whatsoever, it’s almost a softer material (the way you’d compare gold metal to iron). NO STRINGS! I’ve got about 300hrs working with this PLA and I don’t get any strings unless a support fails which is much less often then other colors!

I've been using Overture PLA filament for my 3D printing projects, and it has exceeded my expectations! The filament feeds smoothly without tangling or clogging, and the prints come out with excellent layer adhesion and minimal stringing.The colors are rich and vibrant, and the finish gives prints a professional look. Whether you're a beginner or an experienced printer, Overture PLA is a reliable and high-quality choice. I highly recommend!

I got suggested this brand by a friend that has been printing for 8 years and boy am I happy I listened. This has been an amazing filament for me as a beginner to 3d printing. This filament prints beautifully on my slightly modified Ender 3 V2. Filament arrived in great condition (dry and clean) sealed well in a vacuum sealed bag with a desiccant. Super strong yet slightly brittle (just as PLA should be). The matte finish seems to help hide a lot of minor artifacts inherent to fdm printing (layer lines, seams, ect). The thickness is spot on as measured by my calipers and proven consistent by the fact I have had zero extrusion issues through 3 full rolls of this stuff. Very minimal smell while printing.

Overall a good filament but not the easiest to work with. Some issues with adhesion with smaller parts and some bubbles/chunks, both possibly related to whatever texture additive for the "rock" PLA. Colors are really nice, not as vibrant as shown in the pictures but the better for it. It's a unique rainbow based on my experience and a nice balance of the various colors. Would recommend if you're willing to put up with some optimization work.