Camco Stackable Washing Machine Drain Pan | Great for Apartment-Sized Washers or Stackable Units | Protects Floors from Leaks & Measures 28-Inches x 30-Inches | Crafted of Heavy-Duty Plastic (21006)

My washing has a slight leak; I don't have the money to get any repairs so I purchased this. Works well and is sturdy.

A quality made perfect solution to a long standing problem!! My two aging cats are 16 years old and like some, aren't as careful when it comes to using their litterbox as intended: they'd miss their box and 'do it' over the edge instead. I'd put lots of pee pads around, but still it looked sloppy and they weren't always as leak-proof as advertised. After I refinished my floors, I knew I'd have to come up with something better. This pan was the perfect solution! I still line the pan with pee pads but it is so easy to keep clean and no more leaks onto the floor! And the size is perfect - plenty of perimeter around the box to catch any messes they may do. The cats must like it too because since I started using this pan, they have not missed once over the edge of their box. Not sure why, but it works for me! It's also a very sturdy pan - so if you are going to use it as it was intended, it should be great!

My mother needed this for her compact deep freezer and it worked out perfectly.Fit great, look great, it's sturdy, and price wasn't too bad. It seems as though it should work great if her deep freezer should leak etc.

First - note that the dimensions of this pan are top edge to top edge and the sides of the drain pain slope slightly "up and away" from the bottom to the top. Our laundry center measures about 27" side-to-side and 28-1/2" front-to-back and it fit with about 1" on the sides and 1/2" front and back. You can also raise - or shim - the legs on your laundry center to allow the bottom of the machine to clear the top of the drain pain, gaining a little more room if needed (this might make your machine less stable and more prone to vibration on the spin cycle - but most things in life involve tradeoffs). Although raising your machine could place the outside edges of the laundry center enclosure (case) slightly outside the edges of the drain pain, most leaks are going to be inside the laundry center case itself.While the plastic drain pan is flexible plastic, construction seems solid enough for the purpose. I was able to tilt up the back side of the laundry center, slide the drain pan under, then slide the machine back into the pan (helps to brace the back of the pan against something solid so you can push against it). However, it sure would be a lot easier for two (or three) people to put this in place.Our laundry center sits behind a 30" door so I had to cut away a small portion of the door stop to allow the pan to slide in and out. I have moved this set-up several times with only one problem - the drain line. This drain pan comes with a gasketed 1-1/2" PVC fitting (you have to cut a hole in the bottom of the pan to install the drain) which allows the pan to be connected to a drain - the pan itself will only hold about 7 gallons of water and a typical laundry center holds at least twice that much. If all the water leaks out of your laundry center, no drain pan will be able to hold the total amount without an outside drain. Fortunately, we have a 2-1/2" drain centered in the back of our laundry closet. Unfortunately, we had to take off the cover plate for the main drain to allow the pan drain to fit inside. This means we have to tilt the machine forward until the drain line clears the main drain before we can slide the machine out of the closet for service. For most people, this will be a rare occurrence, so shouldn't be too troublesome. I would have preferred that the 1-1/2" pan drain exit flush with the bottom of the drain pan rather than extending below the bottom - I may solve this problem with a hacksaw if and when I have to move the machine again. Hopefully, that won't happen unless the machine overflows again (twice in 13 years - once too often!).Bottom line - I would have awarded 5 stars if the inside dimensions had been shown (or were easy to find on-line) and the pan drain had an option to exit flush with the bottom of the pan.

I bought this to go under my cat link automatic litter box. I wanted a tray large enough to fit the whole unit in and still have a little space around the unit. This tray is perfect. This keeps all the litter that the cats kick out in the tray, and it's easy just to sweep or vacuum out.

It does its job and what its intended for. No glam, no sham because its not needed. Sometimes simplicity is what we all need and this does it.

I needed to get a tray like this for my washing machine because it leaked a little bit and it does hold up it is very big and give your washing machine plenty of room and it has a draining system that you can install or if you're worried about your washing machine leaking it will at least buy you some time to get back to the washing machine and turn it off if you need to. And the value of buying it was not expensive because I did not know that washing machine trays could get over $100 and I know for some apartments they require you to put your washing machine on a tray like this to help prevent leakage or damage

I personally would have kept mine had it been slightly larger. Due to the size of my washer the drain tray barely didn’t fit. I bought a used one and was surprised to see that it was in amazing condition. I think the product would be even better if supplied with rubber feet to prevent slipping/moving of washer while in use. You do need to cut the drain hole if you intend to use the drain hole portion. They have almost an outline indent of different areas to cut and a cap that you can use but I did not see an actual pre-made opening which I found interesting. Once again, I didn’t get to use mine as it was slightly too small. I think due to the size for my washer, the lack of rubber feet and the lack of an actual drain hole is my reasoning for my rating. Had I been able to use it and it had those two other aspect I would have given it a five star review. Due to the sturdiness, the affordability, and easy installation this product maintained 3 stars (could have been 4 if it fit my washer).(Sorry I don’t have any photos as I returned it prior to my review but I would say the product photos are pretty true to the product.)