IntelCore i3-4150 Processor (3M Cache, 3.50 GHz) BX80646I34150

Happy with this purchase. This is my first PC build.It was difficult to decide between Intel i3-4150 paired with ASUS H97M-E/CSM and AMD A8-7600 with MSI's beautiful and lower cost A88XM-Gaming motherboard. The reasons which made me lean towards the A8-7600 were: (1) The AMD A8-7600 has Radeon graphics iGPU (which I think is better than Intel's), (2) I read some reviews that the A8-7600's performance is very near to that of i3-4130 and (3) Next year, I could upgrade to a Carrizo chip hopefully at similar price as the A8-7600. But, I went for the i3-4150 after I read reviews on blogs and on the tomshardware website which made me feel that the Intel Graphics would be good (so I may not need to buy a separate graphics card), and that the AMD A8-7600 was not available at the time of my purchase.After these few months of use I can say that I am happy with the picture quality of the integrated Graphics, viewed on my Dell P2314T IPS monitor. My understanding from what I read is that a separate graphics card may be needed only if I install a TV tuner card which needs 'Vector Adaptive De-interlacing' (which the AMD APU could have) for a better quality TV picture.I was wondering if I should wait for the i3-4150T, but I don't think this processor is less better at saving power. Along with the i3-4150 (with stock fan), my PC has an ASUS H97M-E/CSM motherboard, Crucial 8GB RAM, a WD Blue WD5000LPVX 500GB Laptop HDD and an Antec EarthWatts EA-430D Green (Bronze efficiency) Power supply. The Kill-A-Watt power meter reading moves around 11-12w at idle, with no user apps running; 12-13w at idle with Firefox running (with few loaded tabs) and in foreground; 15-18w when watching Netflix or Hulu in IE11 with video in a 7" X 12.1/4" sized area (Power use varies with video area. Watching Netflix or Hulu in Firefox in similar sized video area consumes 19-20w; Not sure about Google Chrome). The temperature reading is around 33 degC. I have enabled all 'C' states, enabled Intel SpeedStep, enabled ASUS EPU in BIOS (an ASUS board feature) and set it in 'Savings' mode (in ASUS AI Suite 3), and have disabled many items including ports that would be unused. On disabling the ASUS EPU or setting it to 'Performance' mode, the idle power usage is around 16-17w. I use my PC mostly for Internet browsing, using online apps like Microsoft Excelonline and Google spreadsheet, and watching videos online on sites like Netflix, Hulu, and Youtube. I never play any big games, online or offline. The EPU in 'Savings' mode is perfectly alright for this type of work. In my usage power is mostly below 25w and sometimes goes above 30w and rarely above 40w. In BIOS mode the power drawn is a constant 30w. The standby power is 0w. I was thinking of buying a low noise aftermarket cooler, but the included Intel fan cooler has been quiet till now. Compared to i3-4150, the energy usage of the AMD A8-7600 is higher depending on the TDP selected. See page 12 of article "AMD's A8-7600 'Kaveri' processor reviewed" at techreport site for the figures.Other issue I had was deciding between a dual core or a quad core. From reviews it felt like the i3-4150 would be fast enough for my workload which as I mentioned above is mostly using Firefox, Netflix, Hulu, etc. If I didn't like it then I would upgrade to a quad core Broadwell processor next year (Haswell Refresh and Broadwell CPU sockets are same). On the side, I would like to mention that from online test reports it seems AMD Kaveri 'quad' core are somewhat like a Intel Haswell dual core in CPU computing performance (AMD Kaveri architecture is different from Intel Haswell-refresh. So, an AMD dual/quad core is not equivalent to Intel's). But that shouldn't mean that they would be slow or have lag for my type of workload. I have used a HP laptop that has an older AMD A8-5550m and it was quite fast for my work.It is easy to build your own basic PC like mine. Here is my experience and parts I used in order of assembly. You may choose them or other compatible ones. Determine if you need a Hard Drive Bay Converter for 2.5-Inch HDD, aftermarket cooler, optical drive, the OS you need (should be supported by motherboard), etc. Note that all the items: CPU, memory, power connectors, SATA data cable, etc, except Intel stock fan, have been designed to go in only one way.1. Processor (comes with fan): Intel i3-4150. For a new CPU you do not have to buy thermal paste as the fan heatsink should already have that on it.2. Motherboard: ASUS H97M-E/CSM. Check if the OS you wish to install is supported by the motherboard by checking the vendor's site to see if they offer drivers for it. Many newer motherboards may not have support for Win XP.3. Memory: Crucial Ballistix Tactical BLT2K4G3D1608ET3LX0 2 x 4GB, DDR3, DDR31600, PC3-12800, 1.35V, Low Profile, Memory. Make sure whatever brand you buy is compatible with the motherboard. Crucial has an online tool to check this for their memory.For help to install the CPU, fan and memory, search for a youtube video on "Install CPU, CPU Fan, & Memory" or other similar term. Intel has also provided a manual in the box which gives steps on installing the CPU and fan.Caution: If assembling the PC in winter and if the humidity in your room is low there is danger of motherboard components getting damaged by static electricity transferred by touch, so 'ground' yourself before proceeding. You can touch a screw (must be paint free) on an electrical wall plate or use an anti-static wrist strap for this. By walking on a carpet, rubbing feet on it, or friction with other static causing materials (like 100% polyester blankets) you may develop a static charge. So, to reduce the risk of static damage choose an appropriate area and work surface that is free/away from these materials. Try removing the motherboard from the anti-static bag using the edges to avoid touching components and place it on the same bag for some protection.Now, you can mount these three parts on the motherboard.4. Case: I used an old Dell Dimension L733r desktop case, which is made of nice thick aluminum and is relatively small sized (14½ x 11½ x 6¼). I have not put any case fans as CPU and board temp readings remain in the 30's (degC). I did not find any small micro-atx case that has the features I needed.You don't necessarily need a case for a simple machine like mine. You can connect all the parts and keep them in a wooden cabinet, thick cardboard box, etc (I would prefer to use materials that do not generate static, so wood and cardboard may be OK). If you do this then be careful not to touch the system parts, especially in low humidity (winter time), before grounding youself (See Caution above). You will also have to buy a switch with normally-open contacts (something like "Push Button Momentary Panel Mount Red Knob SPST-NO" at taydaelectronics (dot com) for $0.22. I think the switch side needs soldering unless you can attach the wire using a connector or use some other method to hold it in place.) and use wire jumpers to connect with the power-on terminals on the motherboard.I had to extend my case's power switch connector to make it reach the new motherboard's power connector. If you have to make a wire jumper from the case panel to the motherboard here is how I made it.Item list:a. 24AWG Wire: Determine the approximate length from the case panel to the motherboard's 'System Panel Connector'.b. Dupont 2.54 Male Connectors: I needed these to connect to the female connector coming out of my case's panel. Determine what type of connector your case has on the panel side.c. Dupont 2.54 Female Connectors: To connect the other end of the wire to the motherboard male pins.d. Crimper: I did not want to buy specialized crimpers as they would be useless to me afterwards. So, I bought STEREN D-SUB TERMINALS AWG 22-28 CRIMPING TOOL 500-210 HT-202B, on ebay, which can also crimp other types of terminals including household electrical wire terminals. You may try to use pliers, but I am not sure how good the result would be.e. Single pin Plastic end: To protect the pins. Multi-pin plastic ends (these are joined together) are also available.For how to crimp see these sites. The first two are based on the crimper I bought. I cannot type the whole address as Amazon does not allow it:Search for "How to Crimp Connectors" on the blog (under community menu) at robotshop(dot com).Search for "Обжимаем гнезда на кабель (провод) серии BLS. Фото-инструкция" in search bar at robozone(dot su). Load the page and then use Google/Bing translate.Search for "Crimpin' - my style" on renoirsrants(dot blogspot dot com). You can use google for this.For a tight crimp with my kind of tool you can fold the exposed wire in half.You can now mount the motherboard in the case.5. Power Supply: Antec EarthWatts EA-430D Green (Bronze level of efficiency). See article "45 PSUs tested at very low loads: which one is the most efficient" at hardware(dot info) for a list of efficient supplies tested at 22.5w loads. Mount the supply in the case. Insert the 24 pin motherboard power connector and the 8 or 4 pin (according to what your supply has) CPU power connector to the board.6. Hard Drive: WD Blue WD5000LPVX 500GB Laptop HDD. Since this is a Laptop HDD you may need a 3.5-Inch to 2.5-Inch Hard Drive Bay Converter. I used "Silverstone Tek, Black (SDP08B)". This is a 5400rpm drive, but I do not feel any lag or 'slowness' while working. My Windows 8.1 64 bit PC boots up in about 40 secs to password screen. Connect the SATA data cable between drive and motherboard, and SATA power cable (from power supply) to the drive.7. Optical drive: Optional. Use an external laptop USB drive if you wish to keep the power drawn low; You can disconnect it when not needed. I have not installed this drive in my PC. I installed the OS by creating a bootable USB drive from Windows 8.1 DVD using Rufus utility software (available at rufus(dot)akeo(dot)ie) on an older Win XP laptop. Cheap(around $5 with shipping), used, older(dated 2011 or earlier), brandname (like Samsung, LG, HP, Sony, etc) SATA DVD-RW laptop drives are available on ebay if you need to occasionally use one. If you choose to use a internal laptop optical drive, the SATA data cable will be same as for hard drive but the power cable will be different. Check if your power supply has a slim SATA power connector(Most likely it won't). If not, you will need buy one like at http://www.amazon.com/Pin-Slimline-Sata-Power-Cable/dp/B0056N6TMO.8. USB Drive: Will need a USB drive if you do not install an optical drive and wish to install OS like I mentioned above.That's it. Now, you can install your chosen operating system.Started using on on 6/27/2014 and have had no problems so far. Would definitely recommend this purchase to others.That's all I have to share. Thanks for reading my review.

This is my current setup:Intel Core i3-4150 LGA 1150 - BX80646I34150Gigabyte LGA 1150 Intel H97 (GA-H97M-HD3)Crucial Ballistix Sport 8GB Single DDR3 1600 MT/s (PC3-12800) [will add another stick of ram later]MSI NVIDIA GeForce GT 640 2GB GDDR3EVGA 430W 80PLUS Certified ATX12V/EPS12V Power Supply 100-W1-0430-KRSilverstone Tek Micro-ATX, Mini-ITX Mid Tower Computer Case, Black PS08BI couldn't wait two days for my order of the Crucial MX100 240GB SSD to arrive and started using this computer with a cheap netbook HDD I had laying around (Seagate 320GB 5400rpm). I tried playing FIFA14 and this setup had no problems handling that game which I expected. I will try Far Cry 3 after the SSD arrives tomorrow and see how it plays in full 1080P. I haven't built/assembled a computer in years and after much thought I decided to build one with the newest and cheapest intel core i series and didn't expect everything to fire up in one go but all went well. I didn't go for water cooler based cooling solution this time and just used the intel stock cooler and the one fan that already came with the case. You wont really hear your computer running with this setup during the day only barely at night even when I played FIFA it didn't blast the fans at full speed. I think this CPU is more than enough for many tasks including gaming, however if you are converting video on a regular basis the extra two cores on an i5 series will help reduce overall time to encode.Update 8/28/2014I have now installed a Samsung EVO 240GB SSD and this system is very responsive (swapped the crucial mx100 with my laptops samsung evo) . I have posted the windows 7 score screenshot for this setup. BTW both these SSD's get 7.9 rating for Windows 7.

I used this processor along with a new motherboard to upgrade a previous Pentium Duo system I built a while ago (that's now being used by my kids), and I'm actually very impressed with the performance. I have a custom i7 system for myself (I do a lot of gaming and video editing), and was going to go with the i5 processor for upgrading the kids' PC, but the high price of the i5 put a stop to that. For the high price of the i5, I might as well go with an i7, but the i3 is ridiculously cheap and for the medium level gaming that they do on the PC, it does a great job. They mostly use consoles for gaming, so it really wasn't necessary for them to have an i7 processor. I have this i3 processor on an Asus B85M-G R2.0 motherboard with an older Asus Radeon 7850 graphics card and 8GB of RAM with Windows 7 64-bit, and it's now a very nice, extremely capable system.I have no regrets at all going with the cheaper i3 versus i5/i7 processors.

I bought two of these and my build was as follows:Corsair Builder Series CX 430 Watt ATX/EPS 80 PLUS certified Power SuppySeagate Barracuda 1 TB HDD SATA 6 Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST1000DM003Gigabyte Intel H81 Mini ITX DDR3 1600 LGA 1150 Motherboard GA-H81NIntel Core i3-4150 LGA 1150 - BX80646I34150Corsair Vengeance 4GB (2x2GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CML4GX3M2A1600C9)ASUS VS228H-P 22-Inch Full-HD 5ms LED-Lit LCD MonitorEdimax EW-7811Un 150M 11n Wi-Fi USB AdapterEVGA GeForce GTX 750Ti Superclock w/G-SYNC Support 2GB GDDR5 128bit Graphics Card (02G-P4-3753-KR)Bitfenix Prodigy caseThese computers were built for my daughters so that they could attend online school and play games on their off time. The computers have been up and running for a few weeks now and they've been working great!