Raising Electronics Sliding Rack Server Shelf 1U 19'' 4 Post Rack Mount-Adjustable 15''-22''

Arrived safely and timely. No damage. Easy to adjust length of rails to fit from how it arrived, in the 14 inch position into the 20 inch position my rack required. The depth from the front of rack to the rear supports is 20 inches. I didn't inspect to determine if this could extend beyond 20 inches though. Two screws on each side. As for its sturdiness, well it has zero "play" or sloppiness in the fully extended position, which is 14" out from rack face. Plenty of reach for my Presonus 16.0.2 mixer. My mixer is 16"x16" and if you need greater depth, consider a piece of Masonite board affixed to this drawer or perhaps a thin sheet of aluminum or tin? The available space back of the 24 inch shelf allows for deeper length of gear, if your rack is also deeper, like mine is at 20 inches. Just a thought.BAD INFO ... hete is the "but"The sliding rails prohibit mounting another rack unit directly below this unit because of how these rails extend just a little bit too far below, like 1/8th inch, enough to leave insufficient room. Now, a blank faceplate yes, if I cut just slightly on each side, then I determined I could mount that, but definitely not a device.I also used a Black Sharpie marker to "paint" the shiny metallic ends of the rails, mixes in better with the All Black front appearance. I hope my thoughts help. I read everyone's notes and they've helped me a lot.Oh, BTW if needed, you could add several XLR connections into the front of the drawer/shelf because the 1ru space is available and would easily accommodate 4 to 6 circular cutouts to mount them. I believe it won't deteriorate the integrity of the physical structures support. That's my opinion. Cheers !!

Very cool shelf glides smoothly and quietly but not too loosely expandable rack depth!10/10

I found this item to be of good quality and, in my 27-inch deep IT rack, easy to install. It fits and slides well, and appears sturdy enough for my needs. Unfortunately, one of the supplied cage nuts was actually defective (fortunately I had spares). Surprisingly, although this item arrived in its factory sealed box, it came with no installation instructions -- no leaflet whatsoever in the box. I know how to install these so for me this wasn't a big deal, but shouldn't such items come with installation guidance or at least, a warranty statement and someone to contact at the manufacturer in case of questions? Because of these minor issues, I'm knocking off a star.

GREAT QUALITY AND PRICE, I'VE PURCHASED 90 OF THESE SO FAR FOR MY LOGISTICS CUSTOMER

This product was assembled incorrectly by the manufacturer. When I received the sliding tray, the slide rails were installed backwards and inside-out. Consequently the plastic lever locks and stoppers were damaged (but still semi-functional) because the rails were installed backwards. There are other reviews which have reported the same issues.I spent an hour with a more mechanically inclined friend to figure out how the sliding rail was supposed to be attached to the tray and for the sake of the challenge, we set out together to assemble it correctly. In order to do so, the rails had to be completely disassembled, including removing the glide tray which held the ball bearings. After rebuilding the slide rails, the sliding tray works well and is very sturdy. The tray now extends a full 12" and slides smoothly.Although I really like the quality of the components I cannot recommend this sliding tray. I called the company during NBH but the call went to voicemail. No one has returned my call. Further, there are no instructions available from the manufacturer if the rails are installed incorrectly, presumably because it comes preassembled.This could be one of the best products on the market for the price, but there is apparently no quality control. Just be sure you are willing to return or rebuild this item if you order it.

GREAT SELLER!! Excellent product!!Using these in a music studio they work very well, and are well made. Can't hold a lot of weight with only the front of the rack secured, but perfect for controllers and desktop synths.Raising Electronics shipped the same day. Then I ordered a couple more direct from their site. I made a mistake, had to call them, they were so great, amazing service. Totally my fault, they went above and beyond to take care of me. HIGHLY RECOMMENDED!

Pro: Excellent quality, slides well, stays in place when closed/opened, about 19” of travel, comes assembled, will support lots of weight, and I’ll definitely buy another.Con: 1) Could use a handle. 2) When installing in a rack (19” wide), it had to be inserted at an angle and lowered into place. This required me to remove a switch and patch panel. Not a big deal, just slightly annoying.

This is exactly what I was looking for. I wanted a shelf that fit in my rack for my turntable so I could slide it out.Fits perfectly in a 19inch wide rack. The standard depth was a bit short but I was able to adjust to the depth of my rack (22inch).Build quality is good. The slides are smooth. Great value for the money.The front could be finished a bit better to hide the silver track- but not a big deal (it’s in a closet).Overall I’m extremely pleased.