Vega Foam Fire Block Spray Foam Insulation Kit. Closed Cell Thermal and Sound Insulation. 3 Cans with All Accessories. Covers up to 60 sqft at 1 inch. 3 Canisters Total

I used a polyurethane spray machine to insulate the quonset building I am building and it left some areas that didn't have sufficient coverage. It caused condensation drips. I bought this spray foam insulation to fix those areas. It worked very well. About 90% of the can "sprays" and I used the last bit of each can to fill holes. I used a thermal camera to find the spots that needed fixed. Before I sprayed the areas they showed up as dark blue cold spots surrounded by yellow warm insulated areas. After re-spraying them with the Vega spray insulation the cold spots are not visible on the thermal camera anymore. The spray gun is much better quality than the $15 ones that I have bought on Amazon in the past. The spray pattern with the included tips works well for covering an 8 to 10 inch wide area in one pass. The kit is easy to use and the gun was easy to clean. I recommend warming the cans up to the ideal temperature in the instructions by soaking them in warm water prior to use.

Absolutely love this product it out performed my expectations. I used it in my loft of my tiny house. It’s just a metal roof so when it rained and i live in Alabama so I know rain it sounded like a drum solo. It sealed everything in one coat but I put two coats. Now I barely hear the rain. I would absolutely recommend this product to anybody. Of course there’s a learning curve but be patient you’ll get the hang of it. It didn’t take me long at all. Thank youThomas s.

The media could not be loaded. ***UPDATE*** bumped up to 4 stars because the seller reached out and provided a refund and another case and I had much better luck with it. Overall I appreciated the company's response and am happy with the endResults of the second case. Added new picture to show results.Mixed feelings. First couple of cans worked as expected for the most part. Then the others worked great for a minute or two then started spitting and sputtering and coming out in one long line. Can seemed to have pressure so not sure why thathappened. Shook the next can up extra long and still had the same results. Have a few more to go unfortunately so going to do what i can with them. The long single line wouldnt be horrible except it doesnt want to stick and falls easily. The blobs in the video are where i was trying to make it work anyway.I took a picture of a section of the ceiling. The rafters are 24” apart so one can SHOULD have covered 10ft at 1” deep. As you can see its not even close. Ugh too expensive and def not worth it. Need to find something else now

Waste of money! The foam did not "spray" out of the nozzle. It slowly foamed out. I had shaken the can for at least a minute. The instructions states to hold the nozzle 12" to 18" away from the surface. I had to hold it 1" from the surface for the foam to make contact. Half of the foam fell off the surface. I went outside for fresh air and to see if I could get it to work properly. I tried adjusting the "flow dial knob", but that did not help. I shook the can some more, but that did not help. I tried another can and had the same results. The foam was supposed to spray out in a wide pattern, but obviously that did not happen. I see from some other people's pictures that theirs did not spray in a wide pattern. I bought this product because it was supposed to spray in a wide pattern. Now I have to spend more money on another product to do the job. So frustrating. I will have to go back to clean off the foam so I can do the job with another product.

I needed to insulate the crawlspace concrete walls. Works great for that. Easy to use. I liked that it came in cans so I could use it in the crawlspace that is not high. On hands and knees. One complaint. When the can is getting low, it does not spray well. It comes out in blobs. I also was not able to get the spray even but that was probably because I was on hand and knees.

This is a very complete kit and the product is great. You might want to purchase an extra can or two of foam cleaner.

Very nicely packaged, includes everything you need to get the job done, and even some extras. Smell wasn't terrible and application went smooth when following the directions. Didn't go as far as I thought it would, but I had nothing to base it off of. So I'll be buying more. Just make sure you shake it, shake it, and shake it before spraying.

This stuff worked perfect to insulate the ceilings and walls in my dog kennels (metal walls and roof14 L x 7 H x 14W) -I have to order another kit to finish but I could immediately tell how much cooler the walls and roof were from the Louisiana sun. I will also be ordering more to finish the walls in my shop...