SageThe Precision Brewer Thermal Coffee Brewer - LCD Screen With 5 Presets, Brushed Stainless Steel

Purchased my machine in 2021It might be pricey in comparison to some cheaper machines that do the same thing, but you'll not regret buying it after you've used it for a while. Just over two years of use and never ever had any problems with this machine at all. In my opinion it's money well spent.Tried finding a coffee machine that could do the same, if not more than my old machine, which I had for over 12 years, and this machine was bought as a replacement for my old machine which gave up the ghost, and would cost far more than it was worth to repair it.Easy to use, and all the instructions for use are clear and easy to understand. LCD screen on the machine is simple enough to follow, to allow you to get the right coffee you want ranging from the temp to the strength setting you like. (This is also dependent on the coffee you buy as well)It's not hard to set up. The manual with the machine, and the settings on the coffee machine are simple and easy to follow (it ain't rocket science) and will work correctly.Just follow the guide when setting up the machine for use and that's it. Job done.I've seen a number of reviews on here complaining about the (incorrect) filter being used and people complaining about the filter not working correctly.Buy the correct one and not a knock off/pirated/incorrect/cheapo knock off version.Decent filters cost money because of how they work and what's in them. Don't skimp on them, or you'll end up with a machine that will get major problems down the line due to scale build up inside the machine!The code number for the filter is a BIG BIG clue as to being the correct type to buy.(ClaroSwiss code number: SES008WHT0NEU1)Check to see if the filter has the date wheel on it as well to set as a reminder for when to replace it as most knock off versions don't have this either and check to see that the underside has a gauze filter to allow the water to be filtered through it before buying any filters.When you do finally buy the correct one and use it, place the filter in water, preferably in the water tank of the machine to get it ready for use, it must be kept underwater for at least 2-3 minutes at least to prep it prior to use. Don't let it float on the surface of the water either as this won't help the inbuilt filters to soak the water up, so either put a small weight on it to keep it underwater or simply hold it down in place until all the airbubbles stop and it's drawn enough water into it to be ready for use and you've fitted it into place correctly. When that's done, do two runs to get the machine set for use.Also do the water hardness test to set the machine up, prior to use.(Water hardness papers are with the machine and also available to buy online too.)There's a water hardness setting for this on the LED screen. Cycle through the settings to set it up, along with the time etc.There's also some photos on other reviews for this machine that show their filter floating in the water tank, and complaining that it doesn't fit! If that's happened then you didn't fit it correctly at all, and how it came to float in the water tank after being fitted is mindboggling, as it has to lock in to place to fit, and work correctly!You need to fit the filter into place. Lower it into position, push down, twist and turn and you'll feel it lock in to place. It won't float out of position due to the way it fits."Milky" or cloudy water is probably down to the filter, and also a knock off version.The ClaroSwiss water filters don't do this at all. I've used a good number of these filters andnever ever had any issues with them at all.When this is all done, and correctly too, you're set to go.I suggest using paper (cone) filters, these are available either in your local supermarkets, sold with coffee, or online (ie on here) Helps to keep things clean(er) and tidy when used. Also clean you machine as well. Instructions in the manual for this as well)I've added a few images to show what's to do as well.Upshot is it's well worth buying if you want a coffee machine that can even do coffee on an auto-timer as well as 6 different *strength* settings.I use my machine every day for fresh brewed coffee, and it's great (the coffee in the photo was made this morning) and added it to show a filter in use.This model has a thermal carafe which keeps the coffee hot for around 4 hours. You can "extend" the temperature of the coffee in the carafe by putting boiling water in it to heat the carafe up, thereby extending the length of time the coffee is hot for another hour or so, but is it really worth the hassle, as you'll probably only make enough to for around 4-5 cups. So the thermal carafe is good enough for its intended usage/You can buy other versions that have a heater plate for use with a glass carafe which will obviously keep your brewed coffee hot all day, the trouble is with that type is the coffee can get "stewed" and you'll know it by the taste. You can also set the machine up to have a brew ready for drinking, via a timer setting. (instructions in the manual for this)Look after the machine and it will serve you well.

Love our new coffee maker. It is perfect for our family. Easy to clean. Brew time fast. Lovely designed.

Splendid

The media could not be loaded. I don’t recommend under any circumstances. First size is huge something which nobody likes , after buttons not responding when I first started to use and asked to setup the hardness and flush responded after I tried 5 times each time I had to reset to factory and after to repeat the procedure , anyway I can live with that but not when I always use same coffee which is pre ground coffee for filter machines which I use with my French press good sweet aromatic flavour and to be honest I’m extremely disappointed when I tested with this Sage coffee machine with 20 times more expensive than my french press but to discover the taste horrible after using few times ( used mocamaster paper filter and Melitta ) , I tried to adjust that useless setting my brew with insignificant changes in taste ( coffee ratio/ water exactly as described but more at one point I’ve tried to play a bit with combining the water quantity and coffee with same results —>>> NO COFFEE TASTE AS I WAS EXPECTING BY FAR ) . I consider any cheap under 80£ can make better coffee than this machine . If I new this would be the result I wouldn’t bother to buy or I would go for something cheaper possible with much better result or just the same but saving 100£. I saw on YouTube reviews and added few cheaper machines for you guys to avoid making same mistake as I did .Melitta Filter Coffee Machine with Stainless Steel Jug, AROMAFRESH GRIND & BREW 1021-13 Thermal Black Edition OR Cuisinart DCC-T20 14-Cup Programmable Coffee Maker Touchscreen Black OR Cuisinart DCC780U . Very disappointed and I want my money back . I’m not rich to waste my money on products which doesn’t serve the purpose and throw away if is not good .

Investing in a really good drip machine is big step, I love my coffee and brew with a Hario V60, Clever Dripper and Chemex, but wanted a machine that could produce multiple cups and importantly keep them warm so that I had a ready supply of coffee on tap throughout the day.The machine itself looks very smart, if a little on the large size, something worth considering in terms of your available counter space. The brushed chrome finish looks good but does need a little more attention to keep it looking good.It’s also relatively easy to use, the instructions are fairly straightforward to follow and doing things like programming for timed start has been simple.There are a couple of more unusual steps to take before you can start brewing a cup of coffee, for example testing your water hardness and setting this up on the machine.Once you’re set up, brewing a cup of coffee is easy, I would say that getting the right grind dialled in is important, too course and you’ll get a weak brew, with very little body, I’ve found that grinding a touch finer has worked well and produced good results. Don’t expect anything like a french press though, the coffee from the Sage is very clean, with less body to it than other brewing methods that use immersion to produce the drink.The coffee produced by the Sage using the Gold setting (which produces SCAA Gold Cup standard coffee) is smooth and full of flavour, getting the right grind ensures that bitterness is avoided and that the flavours of the coffee are really brought out.I’ve also tried the Sage with the pour over setting (you need a separate attachment to convert the machine to do this), I used a Hario V60 which worked really well and made a lovely cup of coffee. The only drawback (apart from the cost of a separate accessory with an already expensive machine) is that this can create a few splashes of coffee as the it drips from the Hario into your mug, not the end of the world, but do find my self having to do a clean up afterwards. The pour over setting has become my go-to for single cups of coffee, it’s quick and easy and is perfect for small quantities.To get the best results from the machine, accurate measurement of your water and coffee is important. I weigh both the water and coffee before adding it and use a ratio of 16:1 (water to coffee) to get a good brew, typically this means using just over 18g of coffee to 300ml of water.Only real downside I’ve come across so far is that the silver plastic surrounding the base of the brewer seem to be quite easy to scuff and scratch, simply as a result of inserting and removing the carafe, only a small thing but doesn’t seem to be a particularly durable material , so does need extra care.Overall, I’m very happy with the Sage Precision Brewer, it delivers consistent, smooth, flavourful coffee with the right grind and good quality ground beans. I wouldn’t hesitate to recommend it.