Bahco 14 Pcs. Screwdriver Set, Tri-Wing Head, Black

So with most bit drivers, It's the bits that fail and this kit is no different unfortunately but the bit driver itself is rock solid, So with upgraded impact bits, This driver is unstoppable.

I am refurbishing an old Woden bench vice and three of the screws holding the jaws on were badly mauled and unwilling to turn with an ordinary screwdriver without camming out.This impact driver undid all three of the screws on the first hit each with the hammer.I have learned over the years that cheap tools are just not worth wasting your time buying.This is typical Bahco high quality and makes the job so much easier.

Not used fully yet so I'll update review when it takes a beating but I've used a few bits for lighter work and worked well in my bosch impact driver drill, the bits are stored well in the sturdy case, ive used these impact drivers for years and are a must in any tool kit, i lost bit adapter of my other cheaper 30 y/o impact driver hence this purchase and paid more as this set has good selection of hex and star bits in larger sizes,

Bahco sell 2 types of impact driver, this BH7823 being the slightly more expensive version, more suited for heavy workshop use. As mentioned in other reviews, the bits are what makes this such a good solid kit. Don’t cheap out on others, spend the extra few quid, you won’t regret it.

Well made, good steel, easy to flip direction, proper selection of driver bits.Used a mid range brand since 70s but when that finally died, ever other replacement has been crap. This should last me

I purchased this solely for the purpose of removing the retaining screws that hold brake discs in place, due to the heat and dust they are almost always difficult to remove and if you mess it and chew the head you could be there for hours trying to remove it. With this one or two taps and they pop out! I'm sure it will come in handy for stuck nuts too!

Not the cheapest but what you're really paying for is the quality of the bits. An impact driver is an impact driver, nothing complex or hard to replicate but I've had cheap impact drivers and the bits disintegrate under the large force transfer. Bits in this set are first class. If you're using a tool like this it's probably close to your last resort, why not give yourself the best chance.

Please practice with this before using on your stuck bolt.Chances are you're buying this because something important has a stuck screw/bolt and you could make it worse if you don't figure out how it works.It's the best one on amazon but the ergonomics are misleading. The band around the middle indicating left loosen right tight is just for that only and doesn't relate to the direction it will turn when hit - luckily there is a gap in this collar where you can figure out the mechanics of how it works. It can easily jump to the wrong direction after a hit and then make your problem worse. Get a feel for how to use it and it will be great. Star off for thisStar off for not including PZ bits 2 and 3 (only phillips!) - had to get these from ebay.Took a while to work out how to get square drive - don't remove split collars! just pull it.