Park Tool P-Handle Hex Wrench

Very nice too; Never had a park tool I didn't like

Awesome!!

My 10 year old's bike was ordered and delivered put together. The handlebars were slightly off and I used every tool I had to try and loosen that bolt to adjust and nothing worked. It was so tight, I couldn't even get a drill to move it. So I had to order this thing. And just like that, easily loosened, adjusted and retightened the bolt. The length of the shaft is just right for the torque needed to loosen the bolt.Handy tool to have. Not sure what else will need the exact same size other than the bike, but useful to have around at an inexpensive price.

Park's P-handled hex wrenches are extremely useful in the 4mm and 5mm sizes for running adjustments on gears and brakes. They're very strong, and give far more control on these adjustments than typical Allen keys. The reach is useful and the handle design gives you a lot of purchase on the screw. The metal appears to be strong enough that you can get away with using the ball-joint end with a fair bit of force. I'm not sure what the purpose of buying the full set is, though; there are few uses for the 10mm version, and as for the 8mm, the most common setting there is pedals and that's high enough torque I'd prefer to have the handle on the ball-tip end of the wrench rather than the square tip end (no point trying to tighten or loosen pedals with a ball-tip). But for up to 5mm (and in select cases 6mm) this is a very nice tool to have. Probably I'll add a 3mm version as well, at least at such point as I replace my JIS#2-limit-screw-equipped derailleurs with the latest 3mm Allen-key-adjustable ones.

Short bit loosens tight bolts. Long shart turns them out quickly. The rounded tip allows access to hard-to-reach bolts.

It fits LMAO and works.. i hope you enjoy my in depth review of this hex wrench. Ready... The angle of the hex seems to be just right the wrench seemed to fit perfectly into the corrosponding nut and with gentle twisting force it seems to loosen or tighten said nut i highly recommend this hex wrench because it works on hex bolts LMAO it's fine quality is as expected of you need one this one is fine just get it

Great tool. Great for working on the bike.

I needed this to replace the one that came on my daughter's wheelchair. It's used to make minor adjustments to the headrest and such. The one that came with the wheelchair is mounted to the back of the chair for easy access. It was almost a foot long to provide the required torque but must have been made from soft steel because it didn't take very long to round over the edges to the point where it was no longer usable. I considered just grinding off the ends but decided to look for a more durable replacement. This wrench is well made, durable and fits nicely on the back of the chair. It fits comfortably in my hand and is long enough to apply the necessary torque to properly tighten the adjustment bolts. I highly recommend this wrench!