BTF-LIGHTING WS2811 IC=RGB+IC Addressable Dream Color LED Strip 16.4FT 60LEDs/m 20Pixels/m IP65 Splash Proof Black PCB Flexible DC12V Chasing Effect for Home Indoor Decor(No Adapter or Controller)

Looks are great. bright LED Lights, easy to connect to controller. Can be cut to length and soldered, and adheres very well. Used to make a Polaris RZR Light Whip.

These are great paired with some deep channel light defusers & a good LED controller. I've probably order over 20 so far . Great product

Awesome product !!!!

I've had at least one of these die without explanation, and a second one that might have been user error or might have died prematurely. generally it's outside the warranty. Also, it's frequently recommended to not use these outdoors, which I do anyway. (Expand/contract cycles can be very detrimental to LED strips.)That said, these strips generally "do what they say and say what they do", and I will continue buying them as things break or I expand my Holiday light setup.Please note, I am exclusively using the white PCB, 300 LEDs/100 addressable, 5 meters, IP67 variant.If you need to adhere this variant, or any of the IP67 variants, you will need a silicone adhesive! This is a quirk of chemistry that you don't fully understand, but I've had great luck with silicone glue getting it to stick into aluminum channel. Basically, "only silicone adhesives will stick to silicone".

The quality of this LED strip is probably in the top 75% of the LED strips I've used in the past. It is very flexible and workmanship looks good. It is stinky as can be, probably from the clear IP65 coating on the strip. I have not yet tested the adhesion of the strip, but expecting it to be bad like all other strips but I'll update this review if that isn't the case.I wanted to post power numbers since the specs on Amazon listings for power consumption are never correct. These numbers are for the entire strip of 150 LEDs lit:- Idle Current (no LEDs on): 0.102A @ 12V = 1.224W- All on white (R+G+B): 2.460A @ 12V = 29.5W- All on red: 0.903A @ 12V- All on blue: 0.900A @ 12V- All on green: 0.900A @ 12VYou will want to inject power on the far end, because if you power 12V at one end and turn all the R+G+B LEDs on, voltage at the far end is 9.3V.

LEDs work great, but the fasteners that come with it are a soft rubber or silicone and disintegrate upon using.Had to buy fasteners and adhesive.

I like the way it looks. It has been a slow process with the install. So far it’s really nice.

These feel like quality lights and provide better color and brightness than similar Alibaba ones I bought previously.