Meguiar’s Pro Speed Compound M10032 - Fast-Cutting Compound for Heavy Scratch and Swirl Removal - Professional Car Polish - Compound That Removes up to 1200 Grit Sanding Marks, 32 Oz

If you're looking for a product that works will with 3M pads, costs much less than the over-hyped European counterparts and removes the haze left from sanding, this is it! This is the only product I've found that removes 100% of the haze with only a few passes and works well as a 1-step polish.For my use, I'm using it to remove the haze left by 3M's Trizact 1500 then 3000 pads and with their white compounding pad. I first tried Sonax's Cutmax, which is a step below M105. Both of those products only get rid of ~75% of the haze after sanding. I also tried Menzerna's Super Heavy Cut 300 compound and that gets rid of about 90-95% of the haze after several passes with a good amount of pressure. Haze was still visible when inspecting under direct light, especially on curved panels where heavy pressure or high buffing speed is dangerous. With Meguiar's M100, I can do about 2 quick passes at medium speed and all the haze is gone, leaving a finish that's good enough to call 'show car' quality. The M100 also worked great on plastic bumpers at a low speed where using the other product made no noticeable difference. This will definitely by my go to compound going forward!That said, this compound might be too aggressive for doing a light correction for swirls or car wash scratches. If you use this as an all-in-one compound for light correction work, I'd recommend a less aggressive pad and low pressure.

It is rated as a very aggressive compound. I struggled with my hefty 7-inch Harbour Freight rotary polisher with an old abused wool pad and didn't burn anything, even though it was my first correction job on a car. It removed 1500 grit sanding scratches after 4-5 runs. When I started using 2000 sandpaper, it accelerated the compounding process and the surface of my car was already presentable. I don't have experience with other compounds, but this one worked well for me.

Meguair's products always work well. If not, it is probably you.

I used Meguiar's M10001 Mirror Glaze Pro Speed Compound on my vehicle, and the results were impressive. It quickly eliminated deep scratches and swirls, leaving a flawless finish. The 1-gallon size is perfect for multiple uses, and the product is easy to work with. Excellent for anyone seeking high-quality paint correction.

Great product

I think it works really well

It effectively removes deep scratches and severe swirls, restoring a smooth finish. The 1-gallon container is great for larger projects, and it’s easy to apply and buff off.

It got rid of 1000 grit sand paper scratches on the gauge panel on my Honda Rubicon. I bird pecked and scratched the clear plastic very badly while it was sitting in a tractor shed. It polished out very good and I did it by hand.