DROK Voltage Current Display, DC 4.5-100V Digital Voltmeter Ammeter Multimeter Panel, 0-50A Volt Tester Meter Amp Detector, LED Voltage Amperage Monitor Gauge for Automotive Motor Battery

DROK Voltage Current Display, DC 4.5-100V Digital Voltmeter Ammeter Multimeter Panel, 0-50A Volt Tester Meter Amp Detector, LED Voltage Amperage Monitor Gauge for Automotive Motor Battery

Q: Can this be installed at a breaker box on a 200amp main breaker?

Yes, sort of. You will need 2 meters with their respective current transformers (those black donuts). One donut for each of the main power wires coming from the meter. Since these donuts aren’t split, you will need to disconnect the cables while still live, unless you remove the power meter. Total power used is the sum of the meters. Basically, you will need an electrician. Or you could by the MTP 3100 or equivalent. It comes with 2 current transformers that are split, so that you open them, slide on the cable, and then close them around the cables. No cutting or disconnecting power. The current transformers are connected to a wireless transmitter that transmits to the base station which sums up the power consumed/cost per hour based on your kWh rate and weekly consumption graph from the 120V and 240V loads instantaneously. There is also a cable and software to connect to your PC.

Q: Power source? Does this run off the power of the circuit being tested or does it need a separate power source? Is it "self powered"?

It probably can but if you look at the images posted by the seller, it has a wiring diagram that says "Use isolated power source" for the meter's function. Probably because the meter measures 0-90VDC but is only able to handle a 0-30VDC power source. The last image has a very clear wiring diagram that's easy to red and understand from there on out though. Good luck.

Q: I need this meter to measure ac volts and dc volts thanks

No - it only does AC volts and amps. You likely need 2 individual meters.

Q: The paperwork doesn't show the cutout size. Does anyone know how big the hole needs to be?

Dear customer, Cutout size is 68mmx37.5mm Best regards, DROK

4.3/5

ID del producto: 332955629

Transacción segura

Detalles

Brand
DROK
Power source
Battery
Style
Voltage Tester
Colour
black
Item weight
0.01 Ounces

⚡DC 4.5-100V

💡0.39'' LED display

🔋0-50A current

Comprados juntos con frecuencia

DROK DC 4.5-100V Digital Voltmeter Ammeter Multimeter Panel, DC Amp Meter Voltage Meter, Current Meter 0-50A Volt Tester, LED Display Voltage Gauge for Automotive Motor Battery

Ogrmar Plastic Dustproof IP65 Junction Box DIY Case Enclosure (8"x 6"x 4")

DaierTek 30A 250V KCD2 KCD4 Rocker Switch DPST 4 Pin Red Lighted 120V Rocker Toggle Switch ON Off Heavy Duty T125-3Pack

Descripción

🔍 Measure with Confidence: Your Power, Perfectly Monitored!

SAFETY FIRST - Includes shunt connection to prevent damage.
CRISP LED DISPLAY - Bright and clear visibility for any lighting condition.
PRECISION MONITORING - Stay ahead with real-time voltage and current readings.
VERSATILE APPLICATIONS - Perfect for automotive, solar, and battery management.
USER FRIENDLY CALIBRATION - Easily adjust settings for accurate measurements.

The DROK Voltage Current Display is a high-performance digital voltmeter and ammeter designed for a wide range of applications, including automotive and solar energy systems. It features a bright 0.39'' LED display for easy reading, measures voltage from 4.5V to 100V, and current up to 50A, ensuring precise monitoring of your power systems. With user-friendly calibration options and safety features, this device is essential for anyone serious about energy management.