Draw-Tite 75699 Class 3 Trailer Hitch, 2 Inch Square Receiver, Compatible with 2011-2021 Jeep Grand Cherokee, 2022-2022 Jeep Grand Cherokee WK.

Easy install fits perfectly installed in 5 min minutes with right tools uses 4 bolts from the vehicle. Sits behind bumper and only the square hole for the hitch is visible

Bought this for a 2019 Grand Cherokee. I use it to pull a Honda foreman on a 5x9 trailer. Install is very simple as it is only 4 bolts that mount the hitch on, which are heavy duty half inch bolts. On the left side your tow hook utilizes one of these bolt areas which you just have to remove when installing this. Did it by myself and used a 1.5 ton jack I had sitting around to hold one side of the hitch up while I got the bolts started on the other side. Far as presentation goes it doesn't look as nearly fitted as one that would come with a vehicle equipped with a hitch system, but the whole hitch is tucked up under the bumper and the only thing exposed is the reciever itself. I would recommend buying a tow hook reciever Incase of a pinch and need a mounting point to get pulled out of something. It's a short reciever that goes into your reciever with a heavy duty hook on it. Great value

Product was an exact fit for my 2020 jeep grand Cherokee Laredo. Great Value! Excellent Quality.

It’s got clean lines along the vehicles bumper, I’ve done 4 Draw-Tites in my day but this one was installed by a garage and took 15 minutes at a cost of $60. These bolts are on tight, they are actually being used to hold the actual bumper frame support and it’s hard to get leverage if you don’t have an impact wrench. Again let me emphasize “15 minutes”! Only had one downer on this purchase, 1st hitch arrived bent. Immediately got on line for a replacement and returned it to a UPS Store. Replacement arrived 2 days later. The box is 4’x3’ with very little packaging protection for a 40 lb item but I don’t believe it was bent in shipping, this is heavy gauge steel. I think it was packaged as a bent item.

Yes it will fit an SRT if you dont already have a tow hitch installed, and is much less than the OEM Mopar item, much less.The biggest difference if I am assuming correctly is the Mopar unit has a sligjtly more involved installation, requiring more disassembly to install it. Also, the tow point will tuck up and be covered by the removable tow-hitch cover. You cant have the cover and use the hitch both at once.So, for the installation: This required removal of the lower valance cover panel via plastic pop pins, and removal of the already in place hardware to be reused. Once installed needed to trim the valance cover...it was pretty easy, just use a dremel cutting wheel and snips. There were a couple other points where I added clearance slots and all was good.Overall works well.

Had to order two. The first one arrived with one of the tounges bent, and I didn't realize it until I had removed the jeep's bolts and was under the suv.It doesnt look like it was bent from an impact, there were no paint chips or impact marks.Second one was perfect; a tight fit. Took about 10 minutes to install, used a dead blow mallet to drive it in.It would have been a 5 star review had the first one not been defective.

Wow - a great hitch at a great price and super easy to install! It looks great installed too - no ugly metal cross beam jutting out a mile below the car. Easiest trailer hitch to install that I've come across. It bolted right up to my 2019 Jeep Grand Cherokee in about 15 minutes using the existing bolts and the installation went without a hitch (pun intended). Make sure you follow the manufacturer's instructions and use a torque wrench to properly tighten the mounting bolts! Very happy with this purchase and would definitely recommend this model. The hitch did arrive loose inside a box but it had protective plastic film and cardboard bits wrapped around some areas. The manufacturer could do a little better with packaging, but luckily my hitch arrived scratch-free and undamaged. Now I need to tackle that wiring kit...

Had issues with Curt sending the wrong trailer hitch receiver 4 times. Went to Draw-Tite.I should add that I ordered the 75699 for my 2017 WK2 Jeep Grand Cherokee.Had no issue with install or operation. Tolerances are where they should be to prevent rattle but have easy operation. Protective paint was on point and no blemishes. Seems solid as a rock. Bolted RIGHT into place without issue!Very happy with this purchase and I would go with Draw-Tite any day over Curt now.UPDATE 12/27/2021: Still going strong. Finish still looks flawless over 100's of miles, tolerances are perfect, hardware holding up great. For the love of all that's holy go for Draw-Tite over Curt.