BONTEC Universal Swivel Table Top TV Stand for 26-55 LED OLED LCD Plasma Flat Curved Screens Height Adjustment Pedestal Glass Base Max. VESA 400x400mm up to 40KGClimatePartner certified

This was very easy to assemble, but a few problems arose with the assembly, which when resolved resulted in a sturdy an elegant stand.First of all, I did not buy this for it's ability to swivel (which is fortunate as you will read below) - it was cheaper than the fixed/non-swiveling model that I originally intended buying.Issue 1 : Very minor this, the first screw that I attempted to screw into a fixed hole in the stand, was very difficult. There was an issue with the threading in the hole, so a bit of care was needed, plus a few attempts at turning/backing off and repeating. It took a couple of minutes but eventually it all worked without any threads getting stripped. That was the only screw threading issue, but it being the first screw in the instructions, it was worrying. All others were fine.Issue 2 : This could have been major. The swivel bearing component comes preassembled, mine seemed a little stiff and over-tight but I assumed it would swivel once assembled and there was some leverage available. So, I built it up, and it did move ok. But when I mounted the TV on the stand, it seemed to be leaning a bit after testing the stand and swiveling a bit. Upon closer examination, the centre strut (the bearing is at the bottom of this) was loose on the base and the strut could wobble quite a bit. Meaning, the TV could overbalance if the looseness increased over time. Thinking that perhaps I hadn't tightened the screws enough (given my issue 1 above), I disassembled my work and checked things out - all my screws were tight. It was then I noticed that the bearing pre-assembly was no-longer tight and could easily be moved. It appeared that the screws in this assembly were now loose - my guess is that it was assembled with the two sides of the bearings not aligned correctly (hence the initial over-tightness) but with a little use and twisting the parts settled and thus became loose. Anyway, there were two screws that seemed that held the bearing assembly together, I simply aligned the bearing to make sure the TV would face forward and tightened the two screws so tightly that the bearing would not turn. I reassembled the stand and I now have a very sturdy fixed non-swiveling stand with which I am very happy. I also believe that I could have adjusted the two screws and allowed the bearing to turn/swivel without wobbling, but I wasn't interested in experimenting as the swivel element was not important to me.It does raise a little bit of build quality suspicion, but all turned out well. And it is a fine product at a very good price.

Don't understand some of the negative reviews about this item. OK, so it ain't gold plated but it does exactly what it's supposed to do. The 8mm black toughened glass base is well finished and solid with 4 plastic self adhesive bun feet. Decent quality matt black metalwork parts and a huge selection of fixing screws and spacers to suit everyone. One size allen key supplied, and I only needed a couple of screwdrivers for the 8mm VESA screws I used for the back of the TV and the small anti-lift off safety buckle screws.The visual instruction pamphlet was simple to understandand and assembly was easy for anyone with half a brain. Three height options on the column for the cross bracket and two multi-position vertical brackets for the VESA mounts on the back of the TV offer loads of height options. Decide on your final screen height before you start to avoid any later alterations and you can't go wrong. The swivel mechanism is very smooth and turns my 50 inch Samsung AU9000 effortlessly and without "wobble". Excellent feature if you need to adjust the viewing angle to different sitting positions in your room.One small word of caution though that I've noticed others mentioned. I was perfectly fine with my new Samsung TV because the VESA mountings have 20cm x 20 cm centres. When mounting the TV on the cross arm of the stand the attached brackets were in no danger at all of slipping off to one side or the other. However, if your TV has got the wider 40 x 40 cm VESA centres on the back, be careful. They'll only just catch on the cross arm which is just 43 cm long - you'll be working very close to the ends. Having said that, a first class stand in every way.

Very sturdy and heavier than the 43" TV it is for, a little fiddley to install but works well.

I couldn’t fit my soundbar under the TV, so this seemed like a good option to fix that problem. It is a good solid stand and should fit most TVs. The swivel function is really handy and I’m glad I got the stand with that, makes it much easier to position the TV. Putting it together is reasonably straightforward - the hardest part is connecting the base to the upright part which was really fiddly. The set of fixings are comprehensive and for the money I’d recommend this stand to anyone.

This TV stand is fantastic! It’s super sturdy and holds my 50-inch TV securely. The swivel feature is great for adjusting the angle, and it was straightforward to assemble with the clear instructions. It looks sleek and modern, fitting perfectly in my living room. Highly recommend for anyone needing a reliable TV stand!