Dorman HW7361 Rear Parking Brake Hardware Kit Compatible with Select Ford Models

Everything fit; matched what I replaced. No issues; worth the purchase.

worked

every thing was in the package fit with no problems

Th e break star rubbed the brake shoe after install , adjusting was very hard to open up , if at all . Used old star adjusters worked fine after cleaning… threw this Product in trash , cause too late to RETURN …. DO NOT BUY !

I would buy this again as it may be the only one available. All parts are acceptable, except for the pins. I had two heads pop off of the pins, rendering them worthless. It looks like the punch press went too far, making the material thinner than required to withstand the pressure of the speed clips. Had I not had the OEM parts, I would have had to purchase another whole kit. Dorman needs to take another look at the pin design in my opinion.

The smaller springs were not the same length as the original ones and not even the same (one shorter than the other) and the clips that hold the shoes were way to rigid to bend and made it to hard to install so,I had to reuse the old ones .Also the toothed wheel made to adjust the shoes does not fall in front of the window so no way to adjust the brake from behind the wheel once the rotor is back in place (I don't know maybe I got the wrong one???)Anyway not a very good hardware kit

I'm not sure how the kit works with other Ford models, but for sure it doesn't fit Ford F150. I adjusted it to the minimum position but still couldn't put rotor over the shoes. I had to reuse the original part.I compare it with the original part. The problem is with the socket. It's too shallow.

not made to spec cheap