LG AGZ72909711 Washer Pulsator Assembly

Item as described. Was a much better price and quicker shipping from Amazon than other online sellers. Fixed my washing problem with not a lot of effort. Would recommend.

Purchased this to repair our LG Top Load Washer WT7300CW. The original part had deteriorated and no longer moved in the tub. Found a video online with instructions on how to remove the old one and replace with this item. Took less than 15 minutes to complete and the washer is back in working order. I also like the underside of this updated part, will be much easier to clean and less areas for mold to hide.

A very simple repair to get the washer back in business. One cap, one screw, and it’s done.Perfect fit and operating as good as new.

Perfectly fit my LG WT5101HW. This design seems superior to the original due to less plastic for mold/buildup.Only the center aluminum sleeve was sheered on the original, but this pulsator appears to be the lowest replaceable unit. Installation involved a 10mm socket, a screwdriver, and five minutes of free time. We regularly run tub cleaner through our machine, but you can certainly tell the difference in the picture.How did I know this needed to be replaced? : My wife was complaining that our wash machine was routinely going off balance and she was at the point of putting only the smallest of loads in order to avoid the dreaded "UE" fault. So I checked the level and made some slight adjustments to the feet and BAM, next load didn't throw the UE fault. GTG, congrats to me. Well, next load it was back, but we had 1,600 things going on, so "let's just buy a %&^% new one." Long story longer, Hawaii doesn't have a dang thing in stock and it's near impossible to get rid of your old one without the appliance company taking it after they drop off a new overpriced unit... So a frustrating afternoon of driving around the island wasted, so why not take another look...After watching the machine go through the cycle, it was obvious the agitator wasn't moving under load. When in diagnostic mode with no laundry, it looked fine. The UE code was there because the agitator couldn't make the slight movements necessary to adjust the laundry load while spinning and the unbalance threw the whole unit off.A few youtube videos later and the old agitator was off and it was apparent that the internal threads on the aluminum sheath where stripped clear off. I looked through the manual and maybe half the searchable internet, and could not find a part number for just the aluminum sleeve. So, they've got that on lock. $80.00 for the whole unit, when I only needed the smallest part. Uff. BUT, 80 bucks is a lot better than a $Grand for a new machine and this part is mold free.

Product looked and functioned just like what came on the machine, but the old part had so much damage to the mating teeth that it was not possible to remove. I’d suggest making sure you can remove your broken part before placing an order

Original piece that came with the washing machine is terrible. Manufacturer knew they were bad because it trapped scrud inside and couldn't drain. I'm not sure if this part is the solution to a poorly designed machine but at least its a much superior part than the original equipment.

The agitator plate on my Model WT5680HWA LG washer started coming loose. I attribute this to my partner washing very heavy, rubber backed, rugs; however, as you can imagine, this is a matter of some dispute (moving on...) . I ordered this as a replacement. The first thing to know is that when the old one comes off there is a lot of scummy biofilm that you will want to clean and doing so is both physically challenging and an olfactory catastrophe. The new plate fit very well- although- you should be aware that there are grooves in the center point that have to be aligned and then you really need to get the wheel to seat down through those groves- from above without being able to see it. Unless it is seated properly, the threads will not take, the nut will not tighten, and its a futile effort. After a few moments of frustration, I was able to press it down and sort of snap it in to place and then with a socket it is very easy to tighten. One frustration is that the new plate did not come with a cap?? I guess technically it is not part of the wheel, but that seems odd and something future consumers should be aware of. I was able to salvage the cap off my old wheel and use it, after cleaning off the scum, but of course, I would have preferred a new one! Overall, this worked quite well.

The old one (left, gray) and the new one (right) don't look identical on the bottom but it works just the same. If you're here to figure out if this comes with the metal interior pieces that also has teeth, it does. We searched youtube after our old pulsator came off during a wash one day. We found a video showing us how to change this ourselves and we saved hundreds. Very pleased.