Nilight TR-03 60" Triple 504 LEDs Truck Tailgate Side Bed Light Bar Strip Sequential Amber Brake Running Turn Signal Red/White Reverse

The installation was very easy . Only took a few minute to instal .The reverse light is bright and great when backing up in dark areas . The price is great for this product that I bought another to put on my wife’s truck .

Bought this led strip back in April I've had it since works great have had no issues with it. I love how bright it is and adds a extra brake/turn/reverse lights all which are bright can be seen clearly during a bright sunny day. I got the one without the aluminum back so it could mold to the window better which it did.

Very bright, easy to wire if you have your taillight wiring diagram/color code. Quick splice clips made wiring quick and solid. Un-rolling it onto a flat surface and letting it sit overnight helped, and taking my tailgate off made it much easier to install it level.

Nissan titan underneath tailgate bed

Works great … easy to install… told others about this great product and other products from this company

The lights don't work. The brake lights turn the lights off when the running lights are on. The turn signals won't work when the brake lights are on. When you use the brakes after the turns signals are on the lights sometimes go to a yellow bar instead of red. I verified the correct voltage is coming from the truck. I think the electronics are low quality.

Easy to install very bright, and seems to hold up well in the rain

The leg strip comes rolled up, so you might want to set it out flat for a while so that there is less resistance to sticking to your truck.Cons:1) The adhesive works, but is not great. Buy a roll of genuine 3M VHT tape (red backing) and stack that on top of this adhesive. It's too hard to remove the cheap adhesive from the LED strip, so I just stacked it.2) the wires are very thin gauge, so make sure to tape them up anywhere they could rub.3) The turn signal strobe action is nice, but has a delay to it before it starts. I guess whatever circuitry inside needs to charge up.Install instructions:Plug it in and test it first. You can trigger the reverse section by touching it with the 12v+ brake light terminal.Just make sure it lights up like you expect it to.Flatten out the LED strip and mark the center. Mark the center on your truck. Make sure that the LEDs will be visible between the bumper and the tailgate, it's easy to mount it too low and have the lights obscured by the bumper.Plan which side will get the wire leads. One of the wire leads you'll have to tap into the reverse bulb on one side. The others you can tap into the trailer plug near your license plate.Clean the area with denatured alcohol, brake cleaner or acetone, depending on how careful you want to be with your trucks paint in that area. You want all the oils off and clean hands.Use the VHT tape as listed in the cons section. Slice a 6" wide strip of the VHT's backing material from the CENTER of the led strip, we're going to get the center aligned first and work our way out on either side. Make sure the wires are going on the side you want.Once the center is stuck, work one side at a time, peeling off the VHT backing. Keep it level with the gap of the bumper, and make sure it matches the other side.

The lights seam good so far we will see when the cold weather comes this is the second time I purchased this product the first one some of the lights stopped working after a cold winter weather. At least there is a 2 year warranty

Excelente para los remolques

Reverse light not working