Onforu White LED Strip Lights, 32.8FT 6000K Super Bright Dimmable Tape Light Kit, 600 LEDs Daylight Easter Rope Light, 12V Flexible Strip Lighting for Mirror, Under Cabinet, Home, Bedroom

I bought this to replace another brand that was good for mood lighting and Decor accent but not sufficient to be a serious under counter light. This 16-ft trip was more than adequate for my needs. In fact, I ran it three times across the width of my cabinets.The adhesive worked well for keeping the strip adhered to the bottom of the cabinets. The only problem there was I wanted to stick the dimmer to the bottom of the cabinet to get it out of sight. The dimmer itself wouldn't reliably stick to the strips.This was one of only two Brands I could find that listed the lumens or the brightness. This is probably because they are trimmable and most manufacturers don't know how many of their LEDs are going to be in the final product you use. The brightness, however, was very useful for me because I had an idea of what I needed. The original strip that was too dim turned out to be 250 lumens. This strip turned out to be 1200 lumens. It is very bright and up to the job. In fact, I ended up dimming it slightly. It has the additional advantage that it comes on as soon as power is applied; there is no need to push a button. This is Handy for use with a timer so the strip comes on automatically at certain times of the day.Overall, it works great!

The hallway in my house is long and has a switch for the overhead light at only one end. Thus, when I head down to my bedroom at the end of the day, I can only turn it off before I walk down the hall. This light strip is exactly the length of my hallway; I plugged it in at my bedroom end and just leave this soft lighting on all evening as well as first thing in the morning. It was easy to install and looks super nice. The dimmer switch is also nice - the last set I bought had to be plugged/unplugged each time and eventually the plug wore out.

I upgraded my pantry and wanted even lighting on each shelf. The top-down light just wouldn't cut it, so I used this around the inside door frame.It worked perfectly but I did need to buy a 90 degree kit, which was about $6 to go around the door. I also purchased an in-line motion sensor so the lights turn on when the door is opened, which was about $10.The only issue I have with this is the double-sided tape. It's holding now, but it took several attempts to get it to stay. The 90 degree corners would start to peel the strip away from the wall from it's weight, even though they are very light. I ended up using the provided clamps to keep the corners tight to the wall. The rest of the strip adhered without issue.Seriously, this is the icing on the cake for the pantry project. I often find myself opening the pantry door just to see how amazing these lights look and how great the additional motion sensor works.I forgot to mention, I didn't use the included in-line dimmer switch, and instead replaced it with the motion sensor. I can still add the dimmer switch, but I like how bright they are without it.Also, the 16' is a good amount to go around a standard door frame with about 2"from the actual frame. So some testing to see where you should make your cuts because I found that I actually had to remove a small 8" section at the start of the strip. It just worked better for fitting around the door. The strip terminates with a 2-wire piggy tail, which I cut off.Oh and one more thing. I bought these because they "starting"end of the strip had a standard terminator that was plug and play with the motion sensor I purchased. I could have just as well purchased one that had the clip, but I liked the idea of being able to just plug in.I would recommend these and will be buying these again for my next project...

First of all its budget friendly price but there are few things to compromise for that low price.Pros:1. Its low cost2. Its dimmable3. Great for cabinet lightingCons:1. Can not use as a bed room light as lighting is a little bit low compared to Govee.2. The distance between light strip and controller is very short makes you to reach for the controller if you stick the strip at 6Ft height of the wall.3. Adhesive isn’t very strong

We recently moved into a new home and wanted to do some accent lighting in places like the bathroom, kitchen cabinets, and around our entertainment center. I first bought some light strips from Home Depot, but was disappointed when we saw the color. Although they called themselves soft white, they were very harsh, and we felt like we were in a doctor's office.Then, we found these online. Here are a few thoughts:1. Color - The color is warm, but not too yellow. We have soft white (2700K) lights in our ceilings. We also have amber glass edison bulbs in some chandeliers, which are very yellow. However, for these accent lights, we wanted to match the overhead lights. We LOVE these. They give a nice glow in our entertainment center and behind our bed, but don't make the room look too yellow (note that we have Sherwin Williams Accessible Beige Paint).2. Install - These were dead easy to install. Just be careful to trim on the marked lines. If you don't, you could short out the strips3. Adhesion - So far, so good. I had to do a couple of turns with these (note it's really easy to do, just fold the strip at a 45 degree angle, not on a solder point or LED), and they stuck pretty well. I did use a drop of super glue to hold the joints together, but be careful, as some glues can eat the strips4. Quality - This build quality is good. I like that a physical dimmer is included (even though I didn't use it). I wish the strip itself were dimmable, but that's a small issue for how we are using it.All in all, great product, no complaints.

I bought these lights to put on an outdoor star I made for Christmas decoration (the star hangs under our eaves, so it's protected from the elements, although we haven't had any precipitation in 8 months). The lights were very easy to affix to the wooden slats I used for the star, and you can trim the excess with a scissors. There is also a dial so you can adjust the brightness of the lights, but we have it set to max brightness.