LVDs Controller Board 30 pins m.nt68676 for 17" 19" 1280x1024 M170EG01 M170EN01 M170EN06 M170ETN01 1 LCD Gaming Screen Panel

I used this to modify my 1up Arcade, and then sold the arcade for a nice profit.The device worked wonderfully.The monitor is Model # M170ETN01 1.If you are using this monitor with this adapter, it will work great. The power supply on the 1up will fit into this adapter. Hint, the red wiresm go on your left side with this adapter and the 1up M170ETN01 1.The white ribbon wires will stay in the same place (these connect to the board with the buttons)You can ditch the other part as it is not needed with the 1up Arcade.Please check the model number of your monitor to assure compatibility. Not all monitors in the 1up have the same model number. I included a picture with the monitor (model number clearly seen) and the set up I used. Note the power plug, in the picture, is not in place.

Shipped and arrived very quickly. Works perfectly out of the box. Just follow directions on ETA Prime video for Arcade1up.I wanted to offer my experience with the buzzing / no audio some people mentioned. I had the same issue. The problem is not with the LCD driver. It's a configuration setting in the Pi. I had to add a line to my /boot/config.txt file to force the audio to the HDMI output. If you search online for "retropie no hdmi audio" you'll find the answer. There are 3 lines I had to uncomment or add in the file to get the HDMI working. Apparently, the Pi doesn't recognize this HDMI board right off and has to be forced to output HDMI video and audio in the config.txtFor the audio I had to add the following line:# May not be needed for all HDMI deviceshdmi_force_edid_audio=1That got my audio working perfectly.Also, be sure to use the audio jack on the far right of the board.

Perfect for home brewing Arcade1up

I have one of the new Arcade1Up wall mounted cabinets and it has the newer model monitor. It does NOT work with this controller, though that's not its fault. If it weren't for that, this is a solid set, with clear troubleshooting steps if you run into any mishaps. Just be careful, if you don't know if it'll work with yours, if you have a white sticker with black text on the panel, chances are it's the newer model and you need a different controller. Search up the part number (It's in the title) and you'll find a Reddit thread with an eBay link to one that IS compatible

I purchased this following the same guide everyone else is commenting here, and modded a rampage cabinet to run a raspberry pi. Works great, and has been running for about a week now without any issues. The only thing I wish was the wires being just a little longer, but I mounted it above the screen and it's working great!

The media could not be loaded. Did a diy project. Installed a lcd screen on the side of my gaming pc… this was perfect for what I need.. has everything on it I needed hdmi output and connected for lcd screen to power on.

Great product, however, I have the MK Arcade1UP and the inverter cord is short. During install, I shorted the board by touching the metal housing of the lcd screen and fried the LCD inverter board. ETA Prime’s cord has a lot of slack in it, I ended up soldering longer wires to the inverter cord and was able to mount it to the wood frame. Overall great product and is a must have for the Arcade1UP mod.

Great little board for my Arcade1up LCD screen. (Double check if it's compatible with your display!) Easy to connect and can use existing Arcade1up power cord.With this, I can connect anything with HDMI, VGA, or DVI to the Arcade1Up display. Nintendo Switch, XBox 360, PS3, XBox One, PS4, Raspberry Pi, NES Mini, SNES Mini, Sega Genesis Mini, to give a few ideas.I pair this with plastic stand-offs to mount the board, though. I would never use double-sided sticky tape to mount this. (Yes, I saw videos showing this and it's a bad idea. Electronics need stability and cooling.)