Thinvik Tubeless Rim Tape Bicycle Rim Strip – 10m Roll Width Options 21/23/25/27/29/31mm Anti-Puncture Tape for MTB Road & Carbon Bike Wheels (21mm*10m)

Adhesive is weak. Tape does not stretch to conform to rim. Even after three days pumped up to high-pressure with the tube installed to ensure a seal, the rim tape is wrinkles and leaks. Stay away.

I have converted MANY tubeless wheels. This tape is thin and stiff - hard to work with. There are better brands.

Nothing outstanding good or bad. Similar to Stans and WTB. I use for both tubeless and tubed set ups. I use two layers for both.

I went through two rolls of this tape trying to do a tubeless setup. I tried double and triple wrapping but the tape just would not seal. I made sure the tape was butted up against the side wall without encroaching on the bead seat. After 4 failed attempts and two bottles of sealant I decided to go the ghetto route and use Gorilla tape. It worked on the first try, no problem, so I know my technique was not flawed. And I only had to use one wrap, no doubling up. I even used my own homemade sealant because I was out of "real" sealant and the tire has not lost more than a lb or two of air in the last 5 days. Gorilla tape may be the so called ghetto route but it works far better than this junk and it is a fraction of the cost. For a $14 roll of Gorilla tape you can probably wrap 20 wheels and you can make the tape to what ever width you need. If you have multiple wheels with varying widths you don't need to worry about ordering the correct width. You cut the Gorilla tape to the width you need. Skip this stuff, it is a waste of money. Even the good tape, that actually works, is far more expensive than Gorilla tape and does not work as well.

What more can I say it works. I needed rim tape quick and this was available in 21mm. I ran out and tried electrical tape, but no dice. Should of known better, but I was in a jam.