5 Doors Locker for Employees, Metal Locker Storage Cabinet for Home Office School Gym, Lockable, Require Assembly (Grey)

I've reviewed 13 of these metal peg boards. They are all exactly the same. This one gets 5 stars due to the 9.99 price. The othere average 1/3 higher for the exact same product. Not one thing different.The board is sturdy and strong. Mounting takes some thought. No provided instructions.You could do many mounting options.1. 4 anchors each corner. If you do this and hang the board on screws get bigger truss head screws so it doesn't fall and grabs safely.* any sheet rock attachment buy pop toggles the provided anchors are subpar for any weight.2. Mount a strip of wood on the wall across studs for surface backing.* use the nails in the plastic clips to tac the amount. Also you must screw the plastic hanger too. Drill out the two smaller holes to 1/4 and screw through them.3. You could make a track strip mounted to the wall across many studs and hook the board on the track.4. You could mount screws through a peg hole from the front. This is the safest and strongest. But all methods will hold at least 40lbs I have mounted a few ways and so far my average is 46lbs hanging without failure.5. you could use the plastic mounts enlarging the existing small holes / remove the nails . Then make a template or carefully measure the offset of the plastic mounting heads and have a blind mount that looks clean.* the mounting center lines are different depending of orientation. One direction leaves you at 13 1\4 " which won't hit stud lay out so beware of that.Over all all of the methods above will hold what you hang on the board if you use the hardware I suggested. If you don't well let us know but I wouldn't try it.I like this product the best out of all 13 I've tested due to price point.

I got these to keep my husband's tools and knick knacks organized and it definitely helps keep them from laying around!It's fairly easy to install, but it was also a little frustrating because it didn't come with a template like our other pegboard did.It has a sturdy metal construction, the edges are fairly smooth and the pegs go in easy and hold up well.

I found the BIZOEIRON to be a good quality, durable metal pegboard. It is pretty much identical in size (approximately 16-inches square), the material it is made of (metal) and the mounting hardware it comes with, to the other brands sold on Amazon. I have tried several different brands of metal pegboards and while they are all good quality pegboards, I found the BIZOEIRON is the best value for the money (03/14/2024). The finish is good and even over the entire pegboard. It does accept 1/8” and 1/4" pegboard hooks. The 1/4" hooks do fit very snuggly into the holes and I noticed that when mounting them in the holes in the top rows, the hooks will bump up against the flange on the backside of the pegboard but they are still useable.

I like the pegboard. It's small enough to take advantage of little areas of wall space that might be wasted. It's also a bit more hearty than the fiberboard composition pegboards.Where there are opportunities though is with the provided mounting hardware. The plastic pieces that are included are not going to hold up well unless you don't plan on hanging anything of substance on the pegboard as the pins only extend around 3/8" at best.What you're going to need to do us use the box that the pegboard came in to build a template to drill screw holes for anchors (or simply place in screws for solid wood surfaces) and then mount in that manner. There is no way to directly screw from the front for a real solid mount unless you use long screws and go through some of the peg holes.Aside from the creativity required to mount these, they are not a bad deal. Them being metal means you can even place magnetic items on them. If you are willing to do the extra steps for a good mount, you can't really go wrong with these.

The only thing good about this is that it is sturdy and metal.You'll need to accept the fact that either you're going to have a slightly insecure mounting (a bump upward on it could pop the whole thing off the wall like a picture frame hanging from a nail), or you're going to have to device an alternative mounting method to get it secure.It doesn't include the paper mounting template so you're going to either have to measure and mark carefully, or drill holes through the front surface (not the prettiest thing) to be able to access the screw to drive it in while the pegboard is on it. And if you want a more secure fit you'll need some washers to size up the screwhead.All in all, maybe it's a decent price for the metal, drilling and bending, but they could have done a much better job on the mounting method.

I don't have a very large garage, nor do I have lots of wall space.. it's pretty much packed solid with either shelving or wall storage devices. Above and behind above my freestanding tool box I simply had nails to hang hand tools I needed to regularly access, so this smaller size peg board looked very appealing. In person it was the perfect size for my needs. It was easy to mount and is raised enough from the wall to allow free peg movement. And the metal construction is very robust, seemingly better than you would expect at this price point. Very happy with this item...

As stated this is basically a metal peg board to mount tools etc on. The provided tape mounting makes mounting limited to specific surfaces and the weigh of tools you might want to hang from it. I was going to mount on a concrete wall but I will have to figure out another way to hang it up. It is a sturdy product.

I've recently fallen in love with peg boards for organizing my tools and accessories, and this one is a great addition to my garage! The metal peg board is sturdy and well-made, with a sleek design that looks great on my wall. The price was very reasonable, and I appreciate the included hooks and accessories. It's been a game-changer for keeping my workspace organized and clutter-free. Highly recommended!