CORSAIR Vengeance DDR5 32GB (2x16GB) DDR5 6000MHz CL30 AMD Expo Intel XMP iCUE Compatible Computer Memory – Gray (CMK32GX5M2B6000Z30)

I needed to add extra memory to my AM5 9 9950X based computer for large photo editing and upscaling. I had 32 GB, and some of the larger images needed more resources. On my previous memory modules I ran them at the default speeds since the system seemed a bit lockup prone running the faster settings. This is with an Asus Tuf Gaming x670e-plus wifi motherboard. My impression has been that my board seemed a bit more particular the other AM5 systems.I put the new modules in, the system booted without issue. I ran it for a few days and tried running the modules are the rated speed of 6000 Mhz (the EXPO setting for the memory). Not a single problem!!! I have been super happy to have 96GB of memory running faster than the 32GB modules it replaced. I have seen the memory usage peak to 56GB while editing with no issues. I'm glad I skipped getting the 64GB modules, this gives me a bit of extra headroom.

Low profile enough for even very large air coolers in most cases as far as I know. Tested with both XMP and EXPO profiles with no problems. Very stable at rated speeds in my use case. Timings are tighter than many kits with the same speed and CL. My build is almost all Black/Grey. The lattice heat spreader and chrome nameplate look great. These are a lighter metalic Grey, just so you know. Depending on the model they range from black to a couple of different shades of grey. If you can live with that, then they are great.

Optimal CL for a Ryzen combo.No RGBs for a minimal and clean setup.Best value for the price.Don't spend more in RAM if you are going to be gaming. This are more than enough.

Quedó perfecto, al comienzo cuando lo instalé, la pc demoraba en encender un largo periodo de tiempo, buscando en internet vi que era normal, que cuando se sobrepasa los 32gb es necesario activar una opción de entrenamiento en la BIOS de la placa, hice eso y y quedó perfecto, después active el Expo para aprovechar los 6000mhz y la velocidad aumentó en todo sentido, 100% recomendado, el color no es muy vistoso, pero la capacidad y calidad vale la pena, lo volveré a comprar a penas vuelva a estar disponible

Perfect for productivity and some light gaming (or heavy if you prefer). It takes a bit for the memory to be trained in the system, but it's worth the time it takes when you're doing video/photo editing for stability and boot time. Before you use your system be sure to configure the ram.innthe proper settings in the BIOS. You don't need fancy RGB sticks unless you're into the aesthetics (in which it's fine), but if you want pure functionality for running multiple programs these are the sticks (paired with and excellent 12/16 core CPU) to get you up and running.

I'm using Gigabyte B850 Gaming WIFI6 motherboard with AMD Ryzen 7 9800X3D and so far, I've no issues with this RAM. I chose the EXPO memory profile, although XMP seems to have worked as well, without any observable issues. I've stress tested it with several Unreal Engine instances running very complex scenes, in addition to dozens of Chrome tabs, a video playing and a game running all at the same time. I peaked on all my setup metrics, including the NVIDIA RTX 5800, and everything remained very stable. I've hit the ceiling on RAM continuously for several minutes, with zero issues. I then ran the Windows Memory Diagnostic tool over night (comes with Windows) over night and it didn't find any issues.So, so far, this RAM is doing very well and it's a welcome upgrade in my setup, since my daily workload can be memory-intensive. I've only had this for a few days, but if any issues come up, I'll edit my review.

Its exactly what it says it is on the tin. Only downsides is the price and I had to slightly overvolt mine to keep it stable with EXPO on but that could easily be due to my mobo (Gigabyte X670E Master) no matter which BIOS I use. Currently on F33g from December 2024. Default EXPO latency is 71ns.Other RAM specs:Module Manufacturer: CorsairModule Part Number: CMK64GX5M2B6000Z30Module Series: VengeanceDRAM Manufacturer: HynixDRAM Part Number: H5CG48AEBDX018DRAM Die Revision / Process Node: A / 15 nmModule Manufacturing Date: Week 28, 2023Manufacturing Date Decoded: July 10-14, 2023Module Manufacturing Location: TaiwanModule Serial Number: UndefinedModule Revision Code: 00hDIMM Parameters & AttributesFundamental Memory Class: DDR5 SDRAMModule Speed Grade: DDR5-4800BNBase Module Type: UDIMM (133.35 mm)Hybrid Media Type: Not hybridModule Capacity: 32 GBReference Raw Card: B0 (8 layers)JEDEC Raw Card Designer: SK hynixModule Nominal Height: 35 < H <= 36 mmModule Thickness Maximum, Front: 3 < T <= 4 mmModule Thickness Maximum, Back: 3 < T <= 4 mmModule Rank Layout: SymmetricalNumber of DIMM Ranks: 2Number of Channels per DIMM: 2Number of rows of DRAMs on Module: 1Primary Memory Bus Width: 64 bitsMemory Bus Width Extension: N/ADRAM TimingCore Timings (tCKmin, tAAmin, tRCDmin, tRPmin): StandardCAS Latencies Supported: 22T, 28T, 30T, 32T, 36T, 40T, 42TMinimum Clock Cycle Time (tCK min): 0.416667 ns (2400 MHz)Maximum Clock Cycle Time (tCK max): 1.000000 ns (1000 MHz)CAS# Latency Time (tAA min): 16.666 ns / 40TRAS# to CAS# Delay Time (tRCD min): 16.666 ns / 40TRow Precharge Delay Time (tRP min): 16.666 ns / 40TActive to Precharge Delay Time (tRAS min): 32.000 ns / 40TAct to Act/Refresh Delay Time (tRC min): 48.666 ns / 117TWrite Recovery Time (tWR min): 30.000 ns / 72TRefresh Recovery Delay Time (tRFC1 min): 295.000 ns / 708T2x mode Refresh Recovery Delay Time (tRFC2 min): 160.000 ns / 384TRefresh Recovery Delay Time (tRFCsb min): 130.000 ns / 312TActive to Active Delay (tRRD_L min), Lower Limit: 5.000 ns / 12T, 8TCAS to CAS Delay (tCCD_L min), Lower Limit: 5.000 ns / 12T, 8TWrite to Write Delay (tCCD_L_WR min), Lower Limit: 20.000 ns / 48T, 32TWrite to Write Delay (tCCD_L_WR2 min), Lower Limit: 10.000 ns / 24T, 16TWrite to Read CMD Delay (tCCD_L_WTR min), Low Lim: 10.000 ns / 24T, 16TWrite to Read CMD Delay (tCCD_S_WTR min), Low Lim: 2.500 ns / 6T, 4TFour Activate Window (tFAW min), Lower Limit: 13.333 ns / 32T, 32TRead to Precharge CMD Delay (tRTP min), Lower Limit: 7.500 ns / 18T, 12TFrequency CAS RCD RP RAS RC WR FAW RTP RFC1 RFC22400 MHz 42 40 40 77 117 72 32 18 708 3842400 MHz 40 40 40 77 117 72 32 18 708 3842000 MHz 36 34 34 64 98 60 27 15 590 3201800 MHz 32 30 30 58 88 54 24 14 531 2881600 MHz 30 27 27 52 78 48 22 12 472 2561600 MHz 28 27 27 52 78 48 22 12 472 2561000 MHz 22 17 17 32 49 30 14 8 295 160AMD EXTREME PROFILES FOR OVERCLOCKING Profile Version: 1.0EXPO Section CRC: OKProfile 1 Enabled: YesProfile 1 Enhanced Timings Enabled: NoProfile 2 Enabled: NoEXPO Parameter Profile 1 Profile 2DIMM/Channel: Single N/ASpeed Grade: DDR5-6000 N/ADRAM Clock Frequency: 3000 MHz N/ADRAM Cycle Time (tCK min): 0.333 ns N/ACAS# Latency Time (tAA min): 30T N/ARAS# to CAS# Delay Time (tRCD min): 36T N/ARow Precharge Delay Time (tRP min): 36T N/AActive to Precharge Delay Time (tRAS min): 76T N/AAct to Act/Refresh Delay Time (tRC min): 112T N/AWrite Recovery Time (tWR min): 90T N/ARefresh Recovery Delay Time (tRFC1 min): 885T N/A2x mode Refresh Recovery Delay Time (tRFC2 min) 480T N/ARefresh Recovery Delay Time (tRFCsb min): 390T N/AVDD Power Supply: 1.40 V N/AVDDQ Power Supply: 1.40 V N/AVPP DRAM Activating Power Supply: 1.80 V N/AShow delays in nanoseconds

Works excellent after 8 months of use