Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year
T**N
Oem replacement for toro
My zoro zmaster with the 23 hp Kawasaki should symptoms of clicking when turning the key. Battery voltage was good and the battery is maintained by trickle charge. Felt the solenoid while turning the key and it “clicked” but failed to transmit current to the starter. Got the part number from the manufacturer.Installed the new solenoid and was up and running within minutes. While you have everything disassembled, if you have a jump box, apply 12vdc + to the starter hot post and apply gnd to the - neg battery terminal.The starter should crank. If it fails to crank when power and grounded, the starter is bad. This will apply to about all electrically started gas engines.
J**K
Failed after 2 days. Cheap materials? Other problem elsewhere? Working to solve this puzzle.
Looks like original. Fits perfectly. Shortly after install devolved same systems as original solenoid. It allows some current to the starter but not enough to turn the engine over to start it. This suggests not enough amps getting through the contacts on the solenoid to allow the starter to start the engine. This could be due to too much amperage being required due to a defective starter or poor material used in the solenoid which disintegrated under the normal amperage required to start the engine. It spins like a top if I jumper the battery to starter contact on the top of the solenoid so it appears for now, that the starter is up to the job. If you have ever solved this puzzle please reply to this review. Thank you.
P**D
worked perfectly on my Zero Turn 42" (107 cm) TimeCutter® SS4225
worked perfectly on my Zero Turn 42" (107 cm) TimeCutter® SS4225My mower wouldn't crank, replaced the battery. Nothing. Bought this, installed it. It took less than 15min. The mower started up immediately and works fine again.
D**G
Defected part
Ordered for Toro mower, part was installed easily but did not work. Checked and rechecked the install, but again part did not work. Went to a local auto part store purchased the same part, installed it, and worked it works perfectly. Amazon did a quick refund. I'm sure this happens with a lot of these types of parts, so buyer beware. Other reviews state no issues.
F**N
Perfect replacement toro timecutter ss5000
Fits my toro timecutter ss5000 perfectly and aall the terminals are exactly the same size as the original OEM solenoid. Assembed in about 2 minutes. Works perfectly.
G**L
Works very well!!!!!!!
Replaced my old, non working solenoid with this solenoid and my mower fired right up! I had wasted time buying one from a so called parts place that didn't even take the time to look up the part needed got it home and it failed, returned that for a refund ordered this one and am very pleased.
G**G
Disappointed.
I’m a long time home mechanic (I’m 72 and have been a hot-rodder since I was 14 - yes 14). I’ve replaced many solenoids over the years. This is the first one I’ve seen where the two positive terminals stayed closed even after the engine started. And yes, it was connected correctly. I bought another one at Home Depot and it worked fine.
D**E
The correct part, best price.
Amazon has made repairs like this so simple and easy I diagnose the problem has been the solenoid found the part on Amazon it came I installed problem solved.
Trustpilot
1 day ago
2 weeks ago
