for Microsoft Surface Pro 7 1866 2019 (2019) Screen Replacement for Surface Pro 7 C02XR7Y9JG5H Digitizer 2736x1824 12.3 inch LED LCD Touch Screen Display Digitizer Assembly LP123WQ1 LP123WQ2

Screen is direct swap replacement. Unplug broken screen, plug in this screen. (assuming you restored SSD after removing it) Plug in power cord (USB or Surface plug) and test. Works great, touch works great, pen work great.Adding to the only other review, order about 5 feet of 2mm tape. You can also use about 2 feet of 3mm tape. This is double what you need, it doesn't take much. You have enough to make a mistake or change your mind. Remove mistakes and do it over. Once you have the old monitor removed and SP9 cleaned. Put replacement tape in place leaving adhesive backing on. This makes testing a new screen and sticking it in place a smoother process.

The product was great, well packaged, but there are some things to know! First, do not damage the fully detachable display cable from the old screen. Remove it and keep it for the new screen. Also, try to retain the covers for the 2 speakers, one on each side towards the top of the screen. Otherwise, your replaced screen will show 2 metallic sets of holes in the notches for the speakers.The cable connectors can be tricky, including the one for the power supply. You need the right type & size of screwdriver. In addition, there is a very small spacer circuit board that fits between the main board and connector. Make sure to not lose it & note its orientation, this is critical.Snap the snap-in connectors in place very carefully, ensuring they line up correctly. You should feel/hear it "click" into place. Screw in the connector end, making sure to line up the screw absolutely vertically. Very fine tweezers designed for electronics can be used to hold the screw to get it started. Be careful to not let the screwdriver slide off, it could damage the circuits around the connectors.Before putting things back together, boot up the tablet to make sure everything works. Lean the screen against something so you can see it & be careful to line it up to not put extra strain on the cables.I also reused the metal flange from the old screen that covers the snap-in connector on the screen. I used Gorilla Tape to hold the connector on the screen in place first, as it is easy to disengage it. I then used Gorilla Tape to hold the flange in place.I also used Gorilla Tape for the connector from the screen to the main board, the one that does not have a screw-in mechanism on the main board. (The other end of that cable is essentially bonded to the screen).Verify everything still works before sealing it all up:Apply some form of double-sided electronic device tape to just the outer edge of the shell, all around. Be careful to not cover the microphone, camera & privacy light at the top middle of the shell. Very carefully & gently lower the new screen onto the shell. Using your fingers as guides, make sure everything lines up before pressing the screen in place. You don't want to risk breaking the new screen disengaging it from the wrong tape contact points.Verify everything still works!

My first one arrived packed well, but seemed previously opened. No adhesive was included. Screen worked but touch functionality didn't. Returned for a replacement, this one came better sealed, with tape around the screen ect. Still no adhesive. This screen worked too, and even touch... except for a solid 2 inch wide section on the right side of the screen. Better, but definitely not a functional replacement. I figured i'd say the third time is the charm, but Amazon just refunded me. I guess we've gotta keep hunting for a competent replacement.

I ended up cracking my screen a 2nd time over a year later. I have a surface pro 3. I ordered the same one, arrived quickly and in careful packaging. Very quick delivery for a good price.

Works as advertisedMissing complete instructionsI recommend a good youtube video to help you with it

I needed to replace the charging port on a Microsoft Surface Pro 5 which had shorted due to FOD, and in the process of removing the existing screen:1) I went too deep with the guitar pick and broke the display connection on the screen2) I applied too much force lifting the screen and cracked the screen in a few places, not that this mattered anyway due to #1.Since removing an existing/factory display with the old superhuman-strength adhesive is near impossible without damaging the display in some way, that is where this product came in! Delivered in 1-day and both the display and touch screen worked flawlessly. It also came with new adhesive, which fit perfectly once I painstakingly removed the old adhesive with a utility knife blade.I would 100% purchase PEHDPVS displays in the future.

Great product, is truly brand new, (not like many others being sold that are used). Well packaged with great protection.

Purchased November 15, 2024, it is 3/11/2025 and the what is displayed is starting to viabrate and scramble a little. The display becomes hard to read and fuzzy... as the sync seems to not be working. I protect my tablet and it has not been mistreated. Was very careful when I put it back together... While the problem is intermittent, it is happening more often and I probably should not use this for work anymore as it is embarrassing and I cannot do my work with it.I cannot find the warranty information and this is not so much fun to replace... again. Also, sometimes the touch does not work on the on screen keyboard... but not sure what is causing that.