GLEDOPTOWiFi LED Strip Light Controller DC12-54V RGB CCT APP Control Work with Tuya SmartLife Amazon Alexa

Works well.

Used these with an LED strip and the Tuya smart life app. Paired with Apple HomeKit using homebridge and it all works really well.

How to connect:Step 1, add all wires from RGBW strip light to controller, (ensuring to use 'C' not 'W'Step 2, connect your power supply and turn on(if WHITE LED's start flashing, then go to Smart Life app and simply add the device - no switching on-off required to perform reset)Step 3, if LEDS turn on white with no flashing, then switch on and off your power supply 5 times(you should now see the white lights flash 'the controller is doing this)Step 4, use the Smart Life app to add new devicePlease note the blue light stays on when the device is powered, it does not flash to indicate a reset has occurredI bought 5 and found one to none operational, this is why I wrote the note letting people know when they do work correctly (I think the unit had been returned before as the packaging was not the same as the other four).Hope you have no issues, and wish you many happy ambient hours of lighting fun

Moved the white wire from W to C and they work perfectly.

I had to sadly return this item as it would not power up my LEDs.Tried and retried all various connections that were feasable.The pictures are only a temporary set up as the lights are going to be installed in a feature fireplace.I had the strip connected to another controller and they were working fine,but they would not connect to the app or over bluetooth to my phone so this was my 2nd go at setting up.Have now ordered another manufacturers controller do hooefully 3rd time lucky🤞

Works ok with my strip lighting but the push connectors and fiddly and not as good a screw connectors.

Tried for ages - can’t get either of the 2 that I bought to pair with Hue Hub.

Does what is says it will. A few things to note:1. As mentioned before use the C (Cool White) rather than the W (Warm White) connection.2. Fixes using double sided tape that is well hidden in the box. I used one piece between 2 units so I have a spare strip if I ever need to move the unit.3. Unless you have 3 hands use solid cable for connections otherwise with stranded cable you may end up holding the unit, pushing the cables in and trying to press down the connector with a screwdriver all at the same time.4. You need a separate power supply, this sits between the power supply and the fixture (LED strip).5. Can be a pain to reset especially if there are other smart devices on the same circuit as everything goes into pairing mode. I've been there. Also make sure there is a load connected otherwise it doesn't immediately identify you have turned the power off.