ANYCUBICPLA 3D Printer Filament - New Set (B- White)

Since using the original Anycubic filament, and then trying Stronghero, and sunlo filament, id rather get this stuff.The print quality is so much better. Identical prints, with same settings are rough and poor quality on other filament, and with this stuff, i get consistent results, reel afer reel.

Unlike others, I had very few issues with temperatures (getting on ok with a 195° nozzle and 75° bed on a Creality Ender 3) - so when it prints, it comes out great...when it prints. Out of the last ten prints I've done, two came out OK. 80% of my prints with this filament failed, because - and despite the advertisement that this is not a thing - it is wound onto the spool in such a way that it very frequently jams and the printer cannot feed it to the extruder. The only way to combat this is to pre-unspool a lot of filament (most frustrated to find a 6 hour print failed after 5 hours because of this) or, respool it entirely yourself. Very unhappy that I've wasted a good 400g printing in air and many unfinished or aborted prints. A shame because when it works, the prints are good with this filament. Sort out the spooling technique and I may come back. For now though I will be using other brands.

Halfway through the reel this filament stopped coming off the reel because it was wound on wrong and was crossed under itself. I had left the printer running on its own for a couple of hours and when I went back the filament had broken and the large print I had been halfway through was ruined so I was not happy almost 8 hours wasted and a lot of filament, I guess that's 3d printing for you but still annoying, so will I buy Anycubic filament again? Probably because not everything is perfect all the time and I have never had a problem with Anycubic filament before.If this review has been helpful please press the button below, thanks

EDIT2:The supplier replaced the filament and were excellent to deal with once I worked out how to get in touch.The problem was dealt with quickly, efficiently and politely. Excellent customer service.Replacement filament is excellent quality and highly recommended.EDIT:Now got in contact with the supplier - Amazon don't make that easy to find.Supplier is sorting the problem out - once you get hold of them, the seem to be efficient and helpful.I will return to update my review at the point of getting things sorted.I used the filament provided with my Anycubic printer and it worked great. I also bought some black Anycubic and that also works great - However, I purchased this in May - Opened and tried to use last night. It will not adhere to the bed and basically you end up with a molten mess covering the print head. I tried cleaning the bed, changing the temps, releveling all to no avail. Switching back to the black and prints work, switching to this results in the same failure to adhere to the bed or print correctly - proving its this reel of filament. I can see no way of reaching out to Anycubic or geting this changed as the return window has closed. Wasted my money.

Was having massive issues getting this filament to print through an all metal hot end. Having recently changed the nozzle I thought I may have reseated it incorrectly or that my software retracts were too excessive. Turns out that the accuracy of the filament is a bit hit and miss, I had as low as 1.66 and as high as 1.80 on my digital calipers. The filament also has a slight ovalness to it at places, confirmed by getting a different calliper reading at same spot by just twisting the filament. This all adds up to filament that will get trapped in your heatbreak when using an all metal hot end. Probably fine in a PFTE HotEnd as there is more tolerance... something I moved to a all metal setup to eliminate. Photo provided shows this filament on left and AMZ3D filament on right; the only thing changed between these two prints was the filament. I also bought the black version of this filament which does print better, however there are still signs of under & over extrusion in that sample. I won’t be purchasing this filament again. Please also beware that I was offered free filament to give a positive review; not a good sign.