52CC Gas Powered T-Post Driver, JACKCHEN 1900W Two Stroke Garden Fencing Tool Farm Piling Driver, Air Cooling Single Cylinder Gasoline Petrol Garden Fencing Tool Machine with 2 Post Driving Head

We bought this T-driver post, it works so good it only takes a couple minutes to drive the post in the ground and it works to drive grounds in ; this thing is a shoulder saver awesome tool.Followed the instructions to break it in prior to really running it hard. Held up great and saved us a ton of labor/hassle and got the job done.This driver takes about 5-10 seconds per post to set once I find a clear spot. It goes like the blazes. I was able to install over 20 posts by myself in a little over an hour. It starts up on the first or second pull every time, and the axial alignment of the engine keeps all the weight of this driver in the vertical position easily.This awesome 52CC gas powered, throttle adjustment switch. Two-stroke gasoline engine, excellent stability, speeds up up to 6500 rpm.Included with this amazing tool two socket sleeves: Ф55 & Ф70, 1 oil hole wrench, 1 propotioning pot and 1 priming funnel. Tool bag (4,5,6 socket head wrench ,screwdriver sleeve ,spark plug socket ,srewdriver , 8-10 non-adjustable wrench ,strainer ).It worked great, engine starts easily and this is a heavy duty well constructed tool.Overall it makes building fence a lot faster and easier on you. Certainly recommended excellent tool.

This driver is great, however, using it on six foot T posts is a little challenging. This T post driver weighs a metric ton and is very difficult to lift up high to put over a T post to pound it into the ground. It works well and it does its job. Putting in a fence would go faster if it wasn't so effing heavy. We used a heavy duty step stool and place it in front of the T post, my husband would step up. I'd help him guide the T post, he would drive it down, then step off and I'd move the step stool over to the next post and repeat. With three people, it was basically a game of leapfrog with the stepstool and t posts. If you like a good workout, this is the t post driver for you. Ha!

Game changer. My wife and I did around 200 posts in a few hours.Be aware, it’s heavy. 55 lbs when gassed up with the plunger attached.And don’t add downforce, just gently feather the trigger and let it do its thing. 20-30 seconds and it’s done. That’s in my crappy rocky clay soil.It would have taken me 2 days and a doctor visit to do these by hand. And the same machine at a big box is $550 plus.

I have used this for a couple years. Works great. Well worth the money

I live in the hill country in Texas. Ground here is hard as a rock. Drove t post 2 1/2’ w/ no problems. Went right through roots n rocks. It is heavy but after u put it on post it is easy to use.

I used this post driver to install some heavy duty 6' U-posts (using the 70mm adapter) into frozen ground full of assorted rocks. It performed very well. No need to go full throttle on this thing. Throttle up slowly until you reach "resonance", then the post slides quickly into the ground. The tool is heavy but manageable. I knock off 1 star because the starter handle broke on the 2nd pull (cheap).

Used it for driving pipe and for posts. Surprisingly light weight and easy to start.

Was not able to start the machine very unsatisfied with product. The return of the money was great but I needed this for a particular job so I lost money based on not being able to perform the job based on ordering this unit.