I'm thinking of buying one but will I still be able to have my duct cleaned after it is installed? I'm the thinking it will be in the way.

Good product -- Recommended. We purchased this unit to replace the exact same original unit installed by the builder. We didn't know the blower was in our attic, so the original failed due to neglect after 11 years of service (a long time in my opinion). We did not install a separate inline filter (such as the Fantech DBLT 4W Lint trap, 4" Duct) because there is no place for us to install one unless we open up the walls and completely redo the duct system. Instead, I simply remove the unit each winter and use a duct cleaning brush attached to my drill (https://www.amazon.com/Bluesea-Cleaning-Removes-Synthetic-Attachment/dp/B08MC554YH?ref_=ast_sto_dp) to remove lint build up in the lines (you will have some) both up and down from the blower. I also remove and clean the blower unit which traps lint on both sides of the blower. After cutting electrical power to the blower at the breaker box (VERY IMPORTANT STEP), I simply remove the unit for maintenance. The goal is to remove any lint layers that have built up on the blades or walls of the unit. A set of wooden chopsticks and a shop vac make the job pretty easy. The overall job is not that difficult, but you will spend time in your attic to get this done, so proper respiration, eye safety, and electrical shock prevention are required.

I purchased 32 of these for a new apartment building. 10 of them run continuously. Does anyone know how to fix this or are they defective?

From memory, and I'm guessing here ... the switch diaphragm must be mounted vertically.The switch is activated by airflow throw the plastic tube (it's a clear tube on mine) that runs from the bottom of the fan housing up to the electrical components. Take that tube out of the housing and plug it (tape the end). Let it sit that way for 10-15 minutes and see if it still runs.If it still runs and never shuts off, you may have a defective switch.If it stops, your switch is probably good. I believe I remember that moving that tube further in/out of the housing can adjust the sensitivity. Meaning I think if you slide the tube into the housing further, the switch will activate more quickly/easily. If you pull the tube as far as it can go without taking it out completely makes it less sensitive.If you have some continuous source of airflow, obviously, the fan will blow all the time. But I thought the switch was set to stop at 10 minute intervals and never continuously run - not sure - I thought I remember this feature.

Do you nnee a lint catcher with this? Or will you be fine without it?

The rationale behind 15 ft... If your vent fan is 15 ft or more from your dryer then the lint coming from the dryer will be dry enough such that it will not stick to the vent fan blades and later create imbalance, increased load, and inefficiency. The lint needs to be fairly dry when it reaches the fan blades. If the fan is within 15 ft of the dryer the lint will still be damp and a lint trap will be needed. Get the fan at least 15 ft away from the dryer and no lint trap is needed. Note... If you do get a lint trap make sure you measure the dimensions. It may be deeper than your wall you plan to mount it in. If I remember right the lint trap is around 7 inches deep and many walls are not that deep.

can this be used with gas dryer?

It is activated by the pressure in the exhaust tube and runs on it's own hard wired power supply. I did not see anything on the product description that specifies that it cannot be used with a gas dryer. You could always contact Fantech Customer support: Customer Care10048 Industrial BlvdLenexa KS 66215Tel: 800.747.1762Fax: 800.487.9915USsupport@fantech.net

Desertcart Logo

Deliver to Paraguay

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

💨 Breathe Easy with Fantech's DBF110 Fan!

COMPACT DESIGN - Perfectly sized at 15.24 x 12.7 x 17.78 cm for versatile installation.
VERSATILE VOLTAGE - Operates seamlessly at 120 volts for consistent performance.
GENUINE OEM QUALITY - Trust in the reliability of a genuine Fantech replacement part.
LIGHTWEIGHT CHAMPION - Weighs only 3.54 kg, making it easy to handle and install.
POWERFUL PERFORMANCE - Experience efficient airflow with 40 watts of energy-saving power.

The FantechSystemair DBF110 Fan is a genuine OEM replacement part designed for optimal airflow and energy efficiency. With compact dimensions of 15.24 x 12.7 x 17.78 cm and a lightweight build of 3.54 kg, this fan operates at 120 volts and consumes just 40 watts, making it an ideal choice for both residential and commercial applications.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

₲5858539

Duties & taxes incl.

Paraguaystore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

View all Trustpilot reviews

Brand	Fantech
Product Dimensions	15.24 x 12.7 x 17.78 cm; 3.54 kg
Item model number	DBF110
Manufacturer	Systemair/Fantech
Series	Systemair/Fantech
Color	White
Voltage	120 Volts
Wattage	40 watts
Are Batteries Included	No
Item Weight	3.54 Kilograms

FantechDBF110 Fan, 6 Inches, Fan, Desktop, Laptop, Server

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions