Full description not available
| Manufacturer | Antec |
| Part number | 761345776585 |
| Item Weight | 630 g |
| Package Dimensions | 20.5 x 15.5 x 6.4 cm; 630 g |
| Manufacturer reference | 761345776585 |
| Material | Polycarbonate |
| Voltage | 12 Volts |
| Wattage | 4.2 watts |
| Noise Level | 30 dB |
| Batteries included? | No |
| Batteries Required? | No |
A**R
Works with OpenRGB software,let down fan Noise
Used as x2 140mm front intake fans. Looks great, let down by the audible humming bearing noise.
B**S
AS DESCRIBED!
The media could not be loaded. Very nice looking ARGB fansControlled with aura syncEasy to install for everyone - just follow the manual and learn the names of the connectors
J**N
Grinding Noise
Cons:Of the six 140mm fans I tried, two of them had a grinding noise. One made noise immediately, the other started grinding within a week. I kept a couple (mostly for the rgb hub - see pros below). We'll see if they last.Pros:The noise level is decent, though I do run them at half speed via PWM.At full speed they run fairly loud, but also push a good amount of air. So, it's your typical trade off.The mount points have rubber rings around them to reduce vibrations.I really like the RGB light ring. They are a good size and provide the perfect amount of lighting (IMO). The rings are also on both sides, so you can mount the fans however you need and still see the lighting.The included fan/RGB hub is the only one I have found which can also control the light strip on the front of my Segotep Phoenix ATX case. I tried two other RGB hubs, and they did not work.The RGB hub can be controlled by the motherboard (configured by holding down the mode button for 4 or 5 seconds after powerup - the setting is saved so you only have to do it once).The RGB hub has ports for five PWN fans and five 5V RGB devices.
A**N
Grinding Noise
Wanted to like these fans and gave them 2 different tries. Both sets made a horrible grinding noise. What is sad is I have the 120mm version of these fans and they work just fine! Antec fix these fans! 6/6 fans failed for me and all made the grinding noise
O**3
Annoying rattle sound when mounted to a radiator
Good airflow and lighting, however, if mounted to an AIO radiator it will make a loud rattling sound. The sound will be especially loud if the radiator is mounted on the top of your case with the fans set to exhaust. I tested this with the stock AIO fans (NZXT), a pair of PCCooler fans, and these. These Antec fans were the only ones to make the sound. In short, good as regular case fans but not for an AIO.
A**R
They belong in a dumpster along with the company.
Trash simply trash
Trustpilot
1 month ago
1 week ago