iSpringAPR40 Pressure Regulator Filter Protection Valve with 1/4" Quick Connect, 40 psi

I have a Frigidaire Gallery refrigerator (French doors, ice/water dispenser) and I have ALWAYS had issues with the ice cubes jamming up and not dispensing properly. This inexpensive device has finally fixed my issue.I've known since the first day I got my refrigerator that I've had high water pressure, and I've put up with the ice cubes coming out as one massive lump, and just letting the auger to break up the cubes. But there were days that no ice cubes would come out. I would have to remove the ice bin and try to break up the cubes and even then, it wouldn't be consistent.Also, the water being dispensed would be a "splash fest". Again, very annoying.I tried the 70 psi version first (the refrigerator manual stated that it needs to be 30-100 psi) and that helped. But still had issues with ice cubes and being sprayed with the water dispenser. Since these are so inexpensive, I just ordered the 40 psi version. HUGE difference! Now everything is perfect.I tried to find something similar at local hardware stores and even appliance parts suppliers. They either didn't have anything similar or were outrageously expensive or for the entire home (also expensive and difficult to install). This was an easy and inexpensive fix, that has been well worth it.

Ordered on saturday, the thing showed up on sunday! I purchased this pressure regulator for my refrigerator ice maker/ water dispenser incoming water supply. I've never used the slip and lock type connectors before. I was a bit uneasy about their ability to seal properly, I called a friend who does home remodeling and he said he loves them. Well I cut my plastic lines with a razor and inserted the lines into the regulator and the seal is water tight. Super easy to install, took honestly less than 5 minutes. Now the reason I put this regulator on in the first place, is that my ice maker / water dispenser valve assembly ruptured or fractured to the point that water was leaking from the back of the refrigerator from the valve. I decided to check my home water pressure because these ice maker valves are only light plastic and they prefer to have around 45-60 psi of water pressure on them. Check with the recommended pressure from manufacturer. I found my home water pressure was around 120psi....that is what broke my ice maker valve assembly. The home water pressure is not recommended to exceed 75psi Max! I had my home pressure set on the high end for a better shower experience, but through the years the watts water pressure regulator decided to malfunction and allow full street or line pressure to get into my home network. With this high psi, its no wonder I've replaced my ice maker valve assy twice in the last few years. This inline regulator will keep my refrigerator line pressure at a perfect 45psi. Well worth the moneyspent, now I have a complete system for the refrig. I highly recommend using one for protecting your ice maker system, and be sure to check your home water pressure at your faucet or spigot outside, so you know if your water main pressure is regulated properly into your home, before you blow water lines and water heaters.!!!

Fixed my ice machine problem

Fixed the overpressure issue I was having for my ice maker

Install With ease

This is such an easy fix to reduce the water pressure on a refrigerator filter. (As long as a 1/4 waterline is accessible on the refrigerator.)The problem was very low flow or no flow through the filter. This appears to be a problem with replacement filters on Samsung refrigerators (based on my experience and filter reviews by others) and results from the water supply pressure being too high. The cause for this symptom I can't really explain, but the regulator provides 48 PSI at the filter and the water dispenser and ice maker work as they should now.The best feature is that the regulator pays for itself with the cost of a single replacement filter vs Samsung brand.One should also note that it can reduce the chance of having a water leak due to water pressure beingtoo high.

Turns out the labels were installed backwards thus full pressure from supply line was going straight though the regulator blasting my RO unit with unregulated house pressure. Lots of leaks as a result. This seems to be affecting the whole batch as the same backwards label was on a replacement I purchased. Amazon needs to RTV the whole batch on its shelves and restock corrected regulators.

Great product, does what it says it will do. Amazon didn’t get the little blue retainer clips included in the package because they were missing. I called Nick and he sent me a brand new filter along with 10 blue clips for no charge. If you don’t receive the blue retainer clips just call Nick and he’ll fix you up!!