🎨 Elevate your 3D creations with precision and style!
SUNLU PLA 3D Printer Filament offers a premium 1.75mm diameter PLA material with ±0.02mm dimensional accuracy, ensuring smooth, high-quality prints. Its uniquely neat winding system eliminates tangles, compatible with most FDM 3D printers, and comes in a vibrant purple 1kg spool optimized for reliable, professional-grade 3D printing.
Manufacturer | SUNLUGW |
Brand | SUNLU |
Item Weight | 2.2 pounds |
Package Dimensions | 8.19 x 8.19 x 2.83 inches |
Item model number | 3D Printer Filament PLA Filament 1.75mm |
Color | 1kg Pla Purple |
Material Type | 3D Printer Filament, Polylactic Acid |
Number of Items | 1 |
Size | 1KG |
Manufacturer Part Number | PLA |
A**5
My Go to filament
SUNLU filament is the only filament that has never let me down. Great value, as it costs about the same if not less then other spools and the gloss is great. Perfect size for any PLA supporting printer. I have consistently good prints with it from large stationary prints to small mechanical ones. I have never experienced warping and have always had consistent prints. I have never changed the temperature on my printer once.
S**O
Quality PLA, works well, don't expect a CLEAR printed body.
Good quality PLA, not brittle, not tangled on the spool, not sticky with humidity. I'm pretty new at 3D printing and thought I might be able to get a clear body fabricated, but without a lot of polishing, you'll just have a translucent body with all the layer lines diffusing the light. Still was good for the project I was making. Bonded very well with the printer bed and each layer and formed a strong component.
D**O
Bought a "new" item but red filament was open on 8x250 box.
UPDATE: 5 starsCan't blame the product for amazon's mess, already used the spool that came open, printed perfect. Was expecting this spool to be bad and was ready to throw it away, tried it anyways and it was perfect.No drying, no nothing, just straight up printed.Bringing it up to 5 stars for this reasonORIGINAL: 3 starsIve had good results with this filament, it's my first time buying the 8x250 pack.As soon as i opened the amazon box it caught my attention that the SUNLU box was open, not a good sign because i didnt buy a return item. Inside the box the red filament is also open and looks brittle.Not sure i can blame SUNLU for this given it was fulfilled by amazon, still dissapointedI dont plan to return this item because of this, but i dont think i'll ever buy the 8x250 pack again.
C**S
it is the best and worst Filament i have ever dealt with
This is a very confusing filament. My printer is an Ender 3 v2, and the results from this filament are crazy. I have yet to have better results from any other filament, I printed tiny detailed things that my printer has constantly failed to print with other play, yet at the same time I have dealt with a more frustrating pla, I cant tell if its a printer problem, my printer is almost 5 years old at this point, but If I leave the printer off for an extended amount of time I will most like have to take the hotend apart and unclog it I gone through three of four teflon tubes because It gets clogged and needs to be replaced. In some ways, it is the best, and in a lot of ways, it is the worst, but again, it could just be time to upgrade my printer.
L**E
new favorite for minis
This is my new favorite filament. I use it to print miniatures. This has given me the best results yet in terms of smoothness and layerlines.-has problems with high humidity-adheres to the bed well-doesn't string very much at all.
I**Y
Print Like You Mean It
Alright, let’s not pretend this is your first spool. If you’re buying 10 kilograms of PLA, you’re past the "Benchy" phase and fully in the “I just printed a wall mount, a cable holder, and a sword this week” zone. This SUNLU bulk bundle? Absolute value. Period.You’re getting 10 full kilograms—not janky mini spools or “bonus half reels.” These are solid, 1kg-per-roll full-size reels in a good color mix (unless you went with black/white packs). And let me tell you: for the price? The consistency is shockingly solid.I’ve been through 30+ SUNLU spools across printers—Ender 3s, Sovol SV06, and even my modded Voron—and it prints clean. No excessive stringing, no bubble drama, and minimal moisture absorption if you store it right (ziplock + silica = golden).Real-World Print Tests:Temp sweet spot: 200–210°C on most nozzlesBed adhesion: PLA classic—no glue needed on PEI or glass with 60°CTolerances: Dimensional accuracy is spot-on. I’ve printed gears, enclosures, and even a few GoPro mounts—everything fits.Layer lines: Smooth with a proper profile—better than some pricier brands, not even kiddingWhat I Like:Massive value without sacrificing reliabilityFilament is dry, well-packed, vacuum-sealed like it’s prepped for long-term storageSUNLU color quality is clean—not translucent cheapo stuffSpools are labeled clearly (bless them)
L**O
Solid pack of filament.
Was well packed, each roll comes in it's own box if you plan to resell locally. Each spool is decently wound and in a reusable sealed bag. It's as advertised the pla is standard or better quality, I've been steadily printing at average pla temps around 200-205 pending on use case, I've used it on two different machines the artillery side winder with a 1mm nozzle and a creality ender-3 v3 SE with a standard 0.04 mm nozzle both working well, I've been having a little under extrusion at the start on the E-3 but it's likely the machine or my cura profile, haven't ran into any snagging, the finish is glossy but not shiny. The colors are nice I really loved the purple and yellow the most. It's a fantastic bargain if you don't mind paying up front. Print temperature is standard 200-210. Does not glow, nor was it advertised to but amazon wanted to know lol.
Trustpilot
1 month ago
2 days ago