EAWONGEE Pressure Washer Drain Pipe Hose Cleaning Kit with Jet Nozzle and Rotating Jet Nozzle for Karcher K2 K3 K4 K5 K6 K7 Series and LAVOR Pressure Washer, 15M, 180Bar

Ordered this as we have a recurring issue with our insinkerator disposal unit. For a fraction of the cost of getting a plumber out, you can get this and clear your pipes no problem. Sturdy, great quality and does exactly what you would expect. Attachments all fit well and there is no issue with any leakage when using. Glad I decided to go for this as there are cheaper options to consider when looking to unblock your drains at home, but it goes back to the old saying if you "buy cheap, buy twice". Good investment!

Using a Bosch Aquatak 110 (around £60) this kit cleared a blockage in my son's drain which was causing the dishwasher to fill the kitchen sink when pumping out, and the sink to frequently take ages to empty. I have never 'jetted a drain' before despite having plumbing knowledge and experience, but in under an hour we cleared several quite large 'fatbergs' which had plaqued use of the kitchen sink since moving in.Having watched Youtube I opened the drain cover and inserted the pipe with the jet nozzle (not rotary) tightly attached about 1m and pressed the trigger on the pressure washer (there is no connector that fits the Bosch system but I already had the Bosch/Karcher connector from Bosch). I was amazed that the little washer had the power to make the pipe bury itself in the drain up to the obstruction some metres away! Bit by bit milky liquid flowed out followed eventually by large lumps of grey/white rocky material, which we had to reach in to the gulley and lift out - not the nicest 'job'! After nearly an hour of gentle persuasion we were greeted with clear water running from the sink and all was well. Used with some care it's the best £30 I've spent in some time, I've clean it all up and hung it on it's velcro holder, it's like new and ready to go again, but I don't think that will be any time soon. Key points: the Bosch version is 10m and has a spring on the front, we needed more than 10m and the jet nozzle remained intact in the unpleasant environment. Use plenty of washing up liquid and hot water towards the 'end' to de-grease and lubricate the drain pipe as this released the final brick-sized lump... Good luck and a good 'buy'!

Used this product to unblock waste drainwhich was 10mt long. Jet works well but had to tie to drain rods to ensure the hose would move up the length of this drain. Good value for money. Did the job with a little ajustment.

Our outside sink trap overflowed and I cleared it (as I thought) with stick and garden hose . A few weeks later it blocked again so i hit it with a manual drain snake and power hose into the trap a few weeks later it blocked again.I purchased this 15m drain cleaning attachment for the power hose. I used the rotating brass nozzle and it dislodged a number of tennis ball sized pieces of hard grease from the outlet of the trap. I fished these out with a garden trowel and ran the cleaner in and out until the water ran clear.I then ran the hose up the whole drain working up the line dragging any detritus backwards to the main sewer line. This is an indispensable piece of kit and works for the intended purpose.It self feeds into the drain so I unrolled the coil and laid it out in the garden so it wouldnt kink. I also held the trigger open on the power hose with a block of wood so I could use both hands to feed and withdraw the hose. Good for home DIY, flexible enough to get around trap bends, easy to change heads and seals with an o ring. Gloves and a mask should be worn as the cleaner generates a fine mist loaded with pathogens that comes out of the sewer as it works.

I had a bad blockage in a gulley drain for the kitchen sink, dishwasher and washing machine. Tried the chemicals, no goid. Rods won't bend enough for the tight 90 degree bend. Drain unblocker service quoted £250 saying will need camera inspection for diagnosis and extra cost depending on what is found. So I thought I'd try this. I've got a Karcher K2 jet washer so it fits. Arrived fast, add fittings to both ends of hose is simple. Remove nozzle from K2 trigger, attach hose to this. So far around 2 minutes assembly. Tricky aiming hose down deep drain and into the pipe but nothing too bad. Pull trigger. Spray and gurgling, some foaming then woosh, water disappears down drain. From start of assembly to unblocked drain, around 5 minutes tops. Saved me at least £220. Fantastic.Don't call the drain cleaners, get this and save yourself a fortune. Quick, simple and effectuve. To me its a no brainer. Highly recommended.

Very useful

Unfortunately I can't use because the adaptors don't fit my gun thingy. It's a workforce pressure washer see pic of adapter needed 😭

nice job in the drans thank