NECA Action Figure Display Stands (Pack of 10)

Only thing was the packing was open but all 10 stands were still there tho , I'll buy again for sure got more neca figures to collect

The stands are pretty similar to Funko stands but way larger. I didn't check the dimensions so I was surprised, but their size actually adds stability for if you want to pose figures. They're very simple in design and are compatible with Marvel Legends.

NECA figures are notorious for their instability because they often use soft plastic and peg-joints that cause natural variation in the plastic as well as loose/overly tight joint movement. These stands are good IF your figure is already relatively stable. I used this on several NECA predator figures, and most hold up well. However, the one that does fall has loose hip joints, which I could probably fix with some clear polish or clear hobby glue, but this stand will not keep it up. The peg is very small, so if the figure starts to tilt and bend over, it'll likely fall. I've also used this on Marvel Select 7-8" figure that is quite a bit heavier, and it has never fallen, but that's because it's joints are tight.Overall, I'd say these are cheap, low profile stand that will be good for casual collectors. The NECA logo on them didn't distract much. However, if your figure has loose leg joints (ankle, knee, hip), then this stand may not be as reliable as a stand that holds it from the back unless you tighten the joints first. Also, because the base only uses one short peg, if you shake your table or display case, it's possible for them to fall, so I wouldn't put them too high up anywhere without extra support. Also keep in mind that because there's only one peg, if you're trying to do a dynamic stance, it's possible that your entire NECA figure will not fit on the stand, so one foot will be on while the other will be off. This could also contribute to some stability issues. It depends on the figure. If you want a little more protection against falling figures without a clunky base or back support, then I'd recommend this product.

Not really a review but just wanted to put this out as an FYI. I bought these hoping they would fit my funko pops but the pegs were far too large (two of the Golden Girls and Kelly Kapowski). I don't feel right penalizing the product as it seems to be very nice quality, but unfortunately doesn't work for my purpose.

I recently got NECA's Ultimate Gremlin figure, and it's a great figure. Looks amazing. Only trouble is, the blasted thing would not stand on its own. So I ended up sitting it down on the edge of a shelf...Anyways, this may have worked for this figure (kind of like he's sitting at the movies), but I also have Stripe coming, and Stripe sitting while wielding a chainsaw seems dumb...so I decided to buy these stands.I see a lot of complaints, but I had no issues. I used it on the Gremlin, the peg eased into the hole at the bottom of the feet with no issue, and now the figure is standing. Also used one on the Pale Man I got because he fell over a couple times when I got him to stand.Some of NECA's figures stand on their own, others don't. This seems to be a great solution. The only downside is the cost, they're a little pricey, but at least you get 10, but in my opinion they should be included with the figures that don't stand well...but hey what can you do...UPDATE: These stands aren't that strong. Both my Gremlins fell over, and while trying to get the feet into the pegs the stands cracked. I Don't know how well they work with other figures, but they're pretty terrible with the Gremlins, but I guess the figure is to blame because the articulation is too loose and the figures wobble and you cant get them to stand right...probably better off getting a stand that comes with a clamp for the waist as oppsed to the peg feet. I'm sure it works good on figures that aren't as wobbly, but then you probably don't need the stand because they most likely stand on their own.

I have a decent collection of Star Wars Black Series 6" figures and was frustrated by how some of the figures were so top-heavy I couldn't decently pose them. I've been looking for a solution and these bases are perfect. The stands on these bases fit PERFECTLY on the holes of all my current black series figures. It provides just enough support that I can pose them how I want, without the restriction of covering any of the figure. I was even able to pose them in motion with only one leg braced on the base and it worked with even some of the trickier figures like Ahsoka where her heels make her fall over easily.The price is also very reasonable for how many bases you get. If you have black series figures and need bases, I highly recommend these!

They're reasonably priced, there's like 8 of them in the package, they work. They're good!They are kinda huge for the usual size of Funko figures (don't make me go and check what size it is). But they're transparent and on the floor of the shelf, so I don't much care. If you do, you're warned.

We bought these for Star Wars Black series figures. While it does fit in their feet holes, it's not a good fit, so it will hold them in place, but it's not steady by any means. It's hit or miss with each figure, which I suspect is more the fault of the figures than the stands. I don't know if it was meant to be deceptive, because if you look at the photos there is only one peg on the stand, but the packaging has three spaces, so it looks like those stands that provide you with 3 options, and that's not the case here. Also don't like the print on the plastic. It's nice that it's clear, but would rather not have any print on the base.