VANTRUE11.5ft USB-C Hardwire Kit (12V–24V to 5V) with Acc Functionality, Low Voltage Protection for N4/N4 Pro/N5/N2X/E1 Pro/E360/ACE/N2 Pro (2023)/E1/E1 Lite/E2/E3/S1 Pro

Very easy to install. It comes with various fuse-size wire adaptors where you just remove the fuse that's already occupied in the fuse panel and insert it into the open slot in the wire adaptor. The wire adaptor already has the correct value fuse installed for the dashcam. The control box has a switch for 12V setup or 24V setup needed to make sure that you're battery doesn't completely die if it ends up with a continuous power draw. The red wire connects to your always hot power, yellow is for only hot when its in the on or the accessory position, the black to any grounded portion of the car. For my case, I'm getting the "always hot" red wire from my power door locks slot, "accessory" from my power window slot, and the black grounded wire from a bolt nearby that goes straight onto the body of the car. My dash cam E360 works great with just a turn on/off from my ignition key. Very handy setup.

This hardwired car charger cable offers a reliable power solution for dash cams and other USB-C devices, converting 12V/24V vehicle power to 5V output. At 11.5 feet, the cable provides ample length for clean installation along a car's headliner and pillars. Users particularly appreciate the built-in voltage converter that helps protect devices from power fluctuations and the durable construction that resists fraying. While the cable successfully maintains stable power delivery for continuous dash cam recording, some users note it can be slightly stiff for routing in tight spaces. Overall, it serves as a dependable hard wiring solution for permanent dash cam installation, eliminating the need to occupy the vehicle's cigarette lighter port.

I used this in my wife's 2018 Mitsubishi Outlander Sport. It does the job and haven't had any issues with it over the last year. Please get this and avoid those OBD2 dash cam chargers. I had installed one from Apeman on another camera and when the camera fried, it blew a fuse that controlled the car. To avoid blowing a main fuse, just use the pigtail connectors to tap directly into the fuse box. A much simpler and easier way. The radio fuse is the easiest one on all cars.

I’ve been working on electronics for years. Sometimes there is something simple that will throw you. Here’s what to watch out for.1. The ATM fuse cable is very hard to push in the fuse box. Make sure you don’t bend one of the pins.2. If you are like me where you check out the cable beforehand using a 12volt supply, the button on the side of the unit (N5) will not work if the red (12volt) circuit is disconnected and then reconnected. To test the cable first connect both the red and yellow wires to the 12v supply. Without disconnection the red wire disconnect the yellow wire. Now the button on the side will work.Hopefully this will save you some time. It sure wasted mine.

An absolute necessity for installing a vantrue dashcam. It allows the camera to run sentry mode while the car is parked to capture vandalism or anything that happens while you're away from your vehicle. The kit comes with a multitude of fuse tap adapters to fit into whatever vehicle it's installed in, and has a selector switch that will automatically shut the camera off if the vehicle's battery gets too low to prevent a no-start situation.

I have ordered the Vantrue S1 Pro Dual Dash Cam along with the Vantrue LTE Module and the Vantrue Dashcam Hardware Kit. Based on my product experience the Vantrue products proved to be of the highest quality and extreme user friendliness. The set up of the Camera was very easy and worked perfect. Unfortunately when i connected the LTE module along with the Hardware Kit it did not work as i was planning for when i purchased the products. My main purpose was for the LTE Module to be connected to my phone so that i can track my car on the go. Due to the country i am residing in, the SIM card was not compatible with the module. I contacted Vantrue’s Customer Care and they tried their absolute best to resolve my issue and after multiple failed attempts they offered me a full refund for the three items because they couldnt resolve the issue. Even though it was hard for me to ship the items from my country back to them, they still refunded my order back which i really appreciated because they tried their absolute best to resolve my issue with the products.

Nice kit . Got variety of fuses for different types of cars . I got it for 3 cars and working fine with zero troubles