MONIPA Pig Ovulation Pregnancy Detector Planning Breeder Pig Mating Specifications: Material: Plastic, Metal LCD Size: 2.6'' Test Speed: within 3s Test Range: 10-1990 Max Humidity: 85% Working Temperature: 0-50℃ Power by: 1 x 9V battery( Included ) Step 1. Cleaning : Use a wet towel or toilet paper to clean up the vulva of the sow. 2. Inserting angle and inserting depth: Open the vulva by hand, gently insert the instrument upwards at a 45-degree angle and leave the probe about 2 cm out. Do not insert the whole probe. After that rotate the instrument one and a half to two rotation so that the mucus fully cover the probe. 3. Data reading: At this moment, maintain the pig's normal standing position. Press the button, wait until a number displays on the screen. Then press the button again and wait for the second number. Finally, repeat for the last number. Do not forget recording the three numbers for later. Re-measurement If the numbers need to be measured again, please wait for at least 2 to 3 hours after the first operation finished. Because it needs a recovery from previous operation otherwise the data will be wrong again. Not in estrus The sow is not in estrus if the reading is above 400 In estrus The values begin to drop while the estrus. The lowest value can drop to between 200-250 and maintain about 20 hours. Then the value will rise. When the value rises above 350 to enter the ovulation period, we recommend to operate the first insemination at 390. Operate the second insemination after 6-8 hours.
Trustpilot
2 months ago
1 week ago
