Swisstrax ADCP-BPSR Ribtrax Double Car Pad with Edges, Black/Pearl Silver/Red

Description

The Ribtrax Double Car Pad features the versatile Ribtrax open-profile tile design. This car pad will showcase any vehicle in style in showrooms, garages or car display areas at shows. Maintaining a Ribtrax Car Pad is simple as small debris and liquids fall through the tile's open-profile design, keeping the top surface clear of an abundance of particles. Made with UV stabilizers, the car pads can be used outdoors and will not fade in direct sunlight for years. The Ribtrax Double Car Pad comes complete with tiles, edges and corners. It measures 17.5′ long x 17.5′ wide, covering 268 sq. ft. Putting together the car pad is simple and typically done by the consumer. Typical installation of these tiles is as follows: First, clean your sub floor so it is free of all dirt, grease or debris. You will interlock your tiles starting from one corner and moving to your right. After laying your first seven tiles, you will then move to the second row and begin interlocking from left to right until complete. NOTE: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement. Maintenance of interlocking tile floors is simple. Either use a shop vacuum to pick up any debris that rests on the surface of the tile, gently mop, or complete a light pressure wash.