🚀 Elevate Your 3D Printing Game!
The BIGTREETECH TFT24 V1.1 is a compact and ultra-clear graphic display controller designed for 3D printers. It features a powerful ARM Cortex-M3 STM32F105RCT6 chip, operates at 72MHz, and supports dual work modes for enhanced compatibility and user convenience. Upgrade your firmware easily via SD card and enjoy a seamless printing experience.
R**H
LOVE the ability to use marlin menus AND a touch screen.
The best feature of these is that you can view the marlin menus OR switch to touch screen. The emulator in it allows to swap them ON THE FLY and use both. Very handy if you want a simple interface for the kids and then go to the marlin menus for the pros. Best of both worlds. You can also program the firmware yourself and customize it. I'm a fan of BigTreeTech/BIQU and their products. So far this has worked great and i'm going to replace my reprap discount controllers with these from now on given the price is only slightly more.
J**G
TFT24 1.1 screen
What an awesome product!! Highly recommend if in the market for an awesome new lcd screen.
S**A
Skr pro and TFT24 good to go
**UPDATE**Wow. After speaking with kingprint. I feel a lot better about my purchase. There were some issues with my orders that have been resolved. King print took ownership of their mistake and fixed it post haste. Now I have the pieces I need, and I got them in a timely manner.(Old post)Jog wheel does not work. Had high hopes for this, but received a dud. Buyer beware. Check your components thoroughly. This has happened multiple times now with big tree tech. DO NOT BUT THE SKR PRO. IVE ORDERED 2 boards from these people and both have been garbage. The first blow electronics upon plugging in usb. The second board arrived with not working exp1 or exp2 ports. Can not get the screen to work. Buyer beware. Do or buy anything from this place until they fix QC 50 for a dud board is ridiculous.
S**S
does not work with MKS V 1.4.
Don't buy this crap. Board does not recognize com port and their documentation sucks. Documentation makes a ton of assumptions not clear and vague. Same applies to pathetic youtube video. It is pretty obvious these people copied the board from somewhere else and have not done enough testing on it. No wonder it sells for $18.00. 10 pin connectors are also way too short to run to the front of the printer. The screen came all scratched up even though it has a protective film on it. This shows poor attention to detail from supplier.
T**S
It works, sort of, if you ignore the 'User Manual'
I wasted two days trying to follow the setup instructions in the 'User Manual' for a 12864 LCD emulation. Serves me right, this was one of those times where you shouldn't use the User Manual because it is totally outdated. The manual tells you to download "BIGTREE-TFTF24-12864-(version).bin" from github. That file (for any version) does not exist on github. After replacing the first display I received (which wouldn't download any firmware that I tried to load on it), I concluded:1. That the display doesn't need a firmware update and will boot to 12864 emulation mode immediately (if it's wired correctly).2. The firmware for this display was updated at some time in the past, unfortunately the manual wasn't updated, and the two operating modes, Serial and 12864, have been combined and the display automatically switches based on the connection, leaving only one firmware for download: "BIGTREE-TFT24-V1.1.25.1.bin".Finally, there is no documented way to tell which version is installed so, even though the display works when it arrives, you can't tell if it's old firmware or current. Since there is no documented verification of the above firmware being correct, I'm reluctant to update and break what is marginally working.I say 'marginally' working, because, while it does seem to display and operate correctly most of the time, the display would randomly display garbage where there were supposed to be characters. The garbage would clear itself on the next screen update, but then new garbage would appear at a later time. Would a firmware update fix this? Who knows?Net: I took 1 star off for incorrect documentation and 1 star off for the random garbage.
W**H
Good over all
Took some time to learn how to program.
R**L
Works for me
I like the screen
D**D
Touch mode printing is glitchy
Great potential but formate has some issues and not configured perfectly:- Marlin mode is not using full screen area. (Minor, but ... )- printing in touch fails on some models - looks like some screens firmware glitch as for particular model fail happens always at the same spot while printing in touch mode ( when gcode is streamed by the screen controller to a printer) but same file from the same sd card inserted in ok screen card slots works without any issues when screen in 'Marlin' compatibility mode. So it makes touch mode just useless.But it's still a good price for a screen with ability to change it's color, with sd and USB connectors
J**A
Horrible
Funciona el modo táctil pero el modo marlinNo funcionó nunca horrible experiencia con esta tarjeta
E**0
Perfecta para mi impresora 3d
Montada con electrónica de la misma marca funciona perfectamente.Muy contento.
P**E
Conforme à la description.
Pas encore essayé, mais produit conforme à la description.
P**M
nice screen
All the switches feel good and operate well, there are no instructions and the online videos are not great at showing you how to connect this. It works well in marlin mode and the display is nice an clear , but i have not been able to get it to work in touch screen mode with an SKR1.4 turbo
L**S
goes to a white screen and wont come out of it.
I was going to give this display a really good review as I got it working straight away BUT, it goes white during my prints and I cant see anything, the print carrys on but the display is useless. The only way to get it back it turn the printer on and off again whats the point in that? Will anyone respond to me about this? and how to fix it?
Trustpilot
1 week ago
1 month ago