Description
- ❤【Main Parameter】: Shell material: Copper shell; Power supply:110V,220V; Working voltage: DC48V; Working Current: 4.8A-5A; Output power: 250W. Spray Volume: 3500- 5000ML / H;Cooling model: Air-cooled;Power line: 1.5 m; Water temperature: 5-50°C (the normal temperature is 30°C).
- ❤【Use Attention】: We've connected the wires between the atomizer and transformers, you can use them directly when you receive them. Put the atomizer in water before using, the transformer can not be put in water, then turn on the power supply. The atomizer is suitable installed in a tank with water depth of 7-9CM and is suitable for water level stabilization or artificial water filling. Transformers are moistureproof and not waterproof. Thanks.
- ❤【Material and Single Line】: This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product.10 Head fogger hum-idifier is a single sprinkler line using an independent design, and the use of over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not affect the normal operation of other jets.
- ❤【Automatic Current Regulation】: The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease (does not affect the amount of fog), to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer.
- ❤【Widely Use】: The Ultrasonic Mist Maker can be used in many horticultural application including hydroponics, propagation, foliar feeding, grow room and greenhouse humidity generation, etc.
Specifications:  Power supply:110V Working Voltage:DC48V Working Current:4.8A-5A Power:360W Output power:250W Spray volume:3500- 5000ml/h Cooling model:Air-cooled Shell Material:304 stainless steel shell, shell polished surface treatment How To Use: Place the nebulizer smoothly in a water container and inject an appropriate amount of clean water.  When the water level is lower than the water level sensor switch, the product will not spray;  When the water is higher than water level sensor switch , the spray effect is not good.  The nebulizer will generate heat in the working process, and water temperature will rise. It is recommended that this nebulizer should be used in the water container with good heat dissipation conditions. Plug the nebulizer power cord into an external DC power source. Turn on the power, the product can work normally. Use Attention: Put the atomizer in water before using, the transformer can not be put in water, then turn on the power supply.  The atomizer is suitable installed in a tank with water depth of 7-9CM and is suitable for water level stabilization or artificial water filling.  Transformers are moistureproof and not waterproof, when atomizers are used, they need to be connected with transformers in use,  can not be directly inserted into 110V power supply, and they will be short-circuited. Thanks. If you have any problems,please contact me at any time and we will help you solve it ASAP. Package Includes:  1 x Ultrasonic Mist Maker 1 x Transformer
