Yotache High Density Adhesive Foam Tape 2 Rolls 1" W X 3/4", (New Adhesive Craft) Weather Stripping Gasket Seal, Shockproof, Furniture Protective, 13 Ft Length (2 X 6.5 Ft Each)

I applied it to the underside of an aircraft battery box lid.It adheres nicely.It’s pliable and easy to work with on inside corners

Good adhesion. Very firm rubber. Not as pliable as a brush type weather stripping but great for bigger gaps and increased durability.

good but does not stick well you will have to add some of your own adhesive

I was looking for a denser foam to go under my auxiliary fuel cell in the truck bed. After receiving this product I was very pleased. Cleaned the area for application and put the tape down. There was good adhesion to the bed and was good quality. It was exactly what was needed.

This worked perfectly for me. I needed it to fill the gap where the old seal on my sliding glass door has cracked (they used to use plastic). It was very easy to cut to size and apply. The sticky adhesive stays right in place. Now when I close the door there is no gap or cold air getting in or out. I am a 54 year old female and found this product very simple to use.

The foam is good. Soft, maintains shape, etc. It's lightweight, and the rolls are easy to separate and handle.My only beefs are the adhesive quality and quality control of how the adhesive was applied:--It detached from the foam easily while peeling the backing. If the backing is pried away carefully and then the foam pressed into place, it adheres VERY well to the foam at that point. But directly off the roll, the adhesive came away WAY too easily.--The adhesive strip wasn't always centered, so some adhesive stuck out. Where this happened, the adhesive grabbed a cabinet door where I used this foam on the frame to quiet things. This resulted in the foam being pulled loose when opening the cabinet door just a day after application.--It didn't stay on the wall very well in some spots. So it seemed inconsistent. Which is almost funny given the detaching I mention above... After it was pressed into place in long 10' horizontal runs, it let go of the wall in spots overnight, but NOT from the foam!All that being said, once I got used to the quirks it all went fairly well. I used most of it as a sort of crown molding on the wall where it meets the ceiling to hide the rough edges next to acoustic tiles. Being flat black it just kinds of blends into the tiles too. So I just used additional adhesive to keep it on the wall. Easy to cut/shape. The fact that the foam itself retains it's shape after being pressed on for long periods so works well as a door seal (with better adhesive.)

Exactly what needed. Tape sticks well.

I read a lot of reviews and then decided to order it regardless of the winning cry babies out there. I repair everything myself around here. There are very few products that I use that I actually get pleasure working with, this is one of them. Sure it has a slight bit of extra glue here and there but it does not interfere with its use at all. When you put this stuff on it sticks, and that is the most important aspect you want. It is not super stiff as some say, it is just right. I used this to seal a cellar window I built that needs to come back out when I need it to so I can load wood through the whole. I stuck it against somewhat rough wood trim and it adheres tremendously. It is about an 1/8” thick I believe so I had one spot that still has a slight air leak, but then again I built this myself and it does not have perfection to it. If I did it again I would go to 1/2” thickness so it has just a bit more absorption for flaws. Still, I am very happy with this product and the outcome.